I am particularly interested in the input board with the 4 xlr connectors.
A schematic of only the input board is also oke.
The speaker has a digipro 1000-s powerboard.
Between de bottom right ic and the 16 pin connector the smd components have shifted while desoldering, so a detailed foto of this area would also be ok.
A schematic of only the input board is also oke.
The speaker has a digipro 1000-s powerboard.
Between de bottom right ic and the 16 pin connector the smd components have shifted while desoldering, so a detailed foto of this area would also be ok.
