Hey guys ,
Long story short tv was working, came back in the room it was completely dead. No power at all.
Replaced the power supply board.
Now it plays they Samsung tune when I plug it in but no change in the screen whatsoever.
When I use my multimeter on the vs testpoint I get 10vdc.
On the va test point I get 3vdc .
I've tried the process of removing the other boards from the power supply and rebooting but same result .
The logic board is blinking 5,2
Please offer any assistance on how to correct my low VS voltage problem
Long story short tv was working, came back in the room it was completely dead. No power at all.
Replaced the power supply board.
Now it plays they Samsung tune when I plug it in but no change in the screen whatsoever.
When I use my multimeter on the vs testpoint I get 10vdc.
On the va test point I get 3vdc .
I've tried the process of removing the other boards from the power supply and rebooting but same result .
The logic board is blinking 5,2
Please offer any assistance on how to correct my low VS voltage problem
Comment