I have Envision G19LWK that was given to me for free. Initially, the monitor would only power up for about 3 seconds then go into standby. This turned out to be bad ccfl's so, I replaced them. The power/display board appeared to be fine also. I reassembled the monitor for testing, and discovered that the monitor worked, but with a heavy yellow tint. I tried resetting the color settings to the defaults ,but that made no real difference. Something I notice is that the OSD displays all of the colors on it correctly with no yellow tint. I think the issue is with how the monitor processes signal color but I have no clue what to check for to fix this. The yellow tint appears on both the vga and dvi inputs. Any assistance would be greatly appreciated.