Story, one of my 2 Samsung syncmaster 906Bws started not working. I would turn it on, picture would display for 1 second, then go out, so I stuck a flash light to it and I could see the image, did some research and apparently the psu/inverter board has bad caps. Opened it up, I see 3x caps right next to each other that are slightly bulging at the top, they are not leaking or anything, but they are not indented like the others in a different location. I need some help identifying the caps, as I have no cap replacement experience. A LINK to a place e-tailor would be appreciated, or maybe even something buy able to radio shack.
The are black with 1 side in white (the ground), they have the words
(JH) probably logo
CD284
+105C
7143H
25V
470uf
Any help is appreciated
The are black with 1 side in white (the ground), they have the words
(JH) probably logo
CD284
+105C
7143H
25V
470uf
Any help is appreciated
Comment