I have the dreaded 10 blinks coming from my plasma tv. Read the technical manual that they have posted online and came to conclusion that it could be a bad "A" board. Cause I measure the voltage at connector P7 pin 1 and get 4.97v and pin 5 3.1v, but nothing from pin 7. (looking at power up operation for this information)
From the looks of it. I need 3.2 volts to turn on the power cpu. So it could turn on the relay. Since I don't hear it. Also to supply 14.6v to the IC (5606,5608,5610) that are not receiving anything.
I think this might be the reason why im getting 10 blinks.
Also getting nothing at connector P2 and P11 just more info.
From the looks of it. I need 3.2 volts to turn on the power cpu. So it could turn on the relay. Since I don't hear it. Also to supply 14.6v to the IC (5606,5608,5610) that are not receiving anything.
I think this might be the reason why im getting 10 blinks.
Also getting nothing at connector P2 and P11 just more info.
Comment