Symptoms: Monitor powers on, displays desktop from ~5 seconds to ~5 minutes, then goes black. Cycling power button restores image for variable amount of time.
Image visible with heavy light.
Troubleshooting done so far: Fuse is good. No obviously burned or broken components. The board shows signs of overheating around 3 transformers.
Repair done so far: I replaced all of the large caps on the board with new ones.
I know nothing about diagnostics, but I can solder/de-solder and I can follow instructions.
I thought to replace the inverter transformers but when I tried searching for them, I only came up with a couple pages that confused me more than anything.
So if someone can help me identify the problem or at least find a suitable replacement for the 2 inverter transformers that would be great.
Image visible with heavy light.
Troubleshooting done so far: Fuse is good. No obviously burned or broken components. The board shows signs of overheating around 3 transformers.
Repair done so far: I replaced all of the large caps on the board with new ones.
I know nothing about diagnostics, but I can solder/de-solder and I can follow instructions.
I thought to replace the inverter transformers but when I tried searching for them, I only came up with a couple pages that confused me more than anything.
So if someone can help me identify the problem or at least find a suitable replacement for the 2 inverter transformers that would be great.
Comment