Thank you for the fast help!
If I may ask.....did you use a tool to do this, or did you removed password by using another method?...
global1
Member
Last Activity: 04-26-2025, 10:15 AM
Joined: 09-27-2013
Location: Leeuwarden
-
DA0X32MBAG0 rev G Bios
Hello,
Can somebody unlock file for me?
DA0X32MBAG0 rev G
SN: 5CD7096KY9... -
Hello, does enybody have good picture from Power SSB Bottom model 715GA057-M0F-B00-005T​? I need to repair a 55OLED754/12. On the picture I show where I need to know where a resistor is placed. Greetings...
Leave a comment:
-
Thank you for sending files on other page....Leave a comment:
-
Thank you, but still same problem
...
Leave a comment:
-
I tried your files, but they didn't work. With all files I got same result. Only Dell logo with 'Secured with Dell safebios'. Also fan spin is high.
Also I tried to go through the steps, but I can use some extra information/class. Would you like to help me? You tell to install python and that the command is in the readme file. Does this mean that while installing python I need to use a command during the install, or are the commands needed later on when opening python? The readme file is full of information, and it's not clear to me what is command is important. For now I just installed...Leave a comment:
-
Hello Volinakis,
Thank you very much for the messages. Tomorrow, or teusday I will take time to walk through the steps that you explained, and I will message you back to let you know if I managed to build a bios.
The factory bios mode files that I got from qayyum786 did'nt work, so this motherboard is a good test object....Leave a comment:
-
I'm in for that, and I show you respect, but I don't accept to be approached like I'm stupid. I do a lot for free for people in my life, and in my neighbourhood I'm also known for that, but if I would right away show frustration, than it wouldn't benefit enybody. People are different, communicate different, and need to find eachother in what they need, and want....Leave a comment:
-
Sorry, whe are almost there...Leave a comment:
-
Would you please be so kind to teach me how to extract modules form update package, because that's for sure a thing I don't understand, and I'm willing to teach. And yes, compare file results would be the best and safest way of checking a file, but I didn't, because I never did run into this problem before with the new programmers. When using the older EZP I whas more aware of it, and I need to do that again with this type of model laptop. Also I check ME for corporate and consumer, but always consumer. Even when I worked at a company where we fixed motherboards from laptops it whas ME consumer,...Leave a comment:
-
How dare you!!!! 10 years of programming, no no no, MORE than 10 years, thank you. And that the programmer doesn't read a file correct can happen. I'm totally not the first one who that happend to. Except for you ofcourse, because you must be the best of the best......of the best..........your simply the best, better than all the rest..............
Nope, in all those years I never needed to build a bios image from scratch, because the site where you pay money for has the files provided, and when something goes wrong, they will not help, because they only share the files, unlock them, and...Leave a comment:
-
Thank you for the files!
The laptop only shows 'Secured with Dell safebios', and has loud fanspin. Do you have another option?...Leave a comment:
-
- I'm able to read a bios chipset. I programm for more then 10 years. Started with simple EZP, and now heaving fun with the XGecu PRO, using HxD, using ME analyzer v1.307.0 r353 (yes, latest version), Flash image tool. Also use different commends in ME Analyzer, for example to check that the touchscreen settings are correct, after changing settings in Flash imag tool. So no problem with all of that. Only problem I had whas saving a 'bad' file, and therefore needed clean files, bios factory mode files.
- You didn't ask what I ment with 'bad', and you say bad means in no way empty, but that's...Leave a comment:
-
Hello Badcaps users,
Does enybody has bios factory mode files for me that I can test for motherboard LA-M401P?
I don't have the original 16mb file, so I don't know if the file needs to be ME corporate, or ME consumer. Maybe you can provide me with different sets of the 16mb, and 32mb files that I can use to test.
I only have 32mb file.
ST: C940GY3
Thank you in advance....Leave a comment:
-
Yes, you did. Still I thought I did what you asked me, and that you did understand that if I say 16mb is bad, that it's not usable, and that's why I ask for bios factory mode files. So, that's why I tell you to keep in mind that sometimes it takes a little bit more to get to the same point. We are just two humans who try to understand eachother.
You already know my situation, but you still don't seem to provide me with different files I can test. But rather you like to send messages to share your frustrations, and yes, that will not help me to make the laptop work.
Thank you...Leave a comment:
-
You told me: 'as I said, upload your bios backup', so I thought you understood that my file wasn't usable, and that you just wanted me to upload one file 'bios backup'. You didn't ask for 'bios backupS', so multiple files.
It seems that you are very annoyed with me. Maybe you can keep in mind that sometimes it takes a little bit more to get to the same point. No need to act up!...Leave a comment:
-
Then I saw that the safed file of the 16mb whas bad, means there whas nothing in the file when I checked it in HxD. So yes, I'm something, but maybe you have bios factory mod with ME corporate, and ME consumer, and cv3 or cv3plus....Leave a comment:
-
ST: C940GY3...Leave a comment:
-
I mean bios factory mode file. I saw that gayyum786 shared these files on the page called ' [B]Dell latitude 5440 la-m402p rev 1.0(A00)' [/B]
You can see what he shered under message #7
gayyum786 says 'Here is your new bios factory mode (No dmi or service tag add it manually)'.
I tried to remove password, so I paid for file on Vinafix. After flashing there was still a bios password. So not so very smart I flashed the 16mb fil, and that didn't work. So I flashed back the original files, but then I saw that the safed file of the 16mb whas bad. So therefore I try to...Leave a comment:
-
Maybe I didn't understand what you wanted. I thought you asked for service tag to help me with files. But am I wrong? Do you just inform me about the need to give service tag to get help? This was my second post, and if it's the case you pointed me to the rules, than sorry for making a mistake. I thought it wasn't needed, because I need clean files....Leave a comment:
No activity results to display
Leave a comment: