Good morning Azozexd. I followed your suggests and I ordered also new flat but my surface doesnt't works correctly. Problems is in part of touch screen of display and also doesn't works internal mouse and keyboard. It works only connected to usb ports. Please can you check if the problems in in bios file? I send you again original file and S/n.. Please help me!!! thank you in advance!
S/n: 019542794453...
amon76
Member
Last Activity: 04-26-2025, 04:40 AM
Joined: 08-29-2013
Location: salerno
-
Good morning Azozexd. Ty so much for your helps. Now finally my surface started with your bios but, after all installations, I have problems with some zones of touch screen. It works only on left and right side.
Also I have problems with keyboard and touch pad that doesn't work.
Please, do you have some solutions?Leave a comment:
-
Good morning. Please I'm searching help for to have a clean copy of a bios for a Surface X 1876 or to clean my readed bios because I have problems with UEFI passwords. Can you help me? I'm waiting for a your kind reply. Best regards
SN: 019542794453...Leave a comment:
-
Good morning.
Please I'm searching help for to have a clean copy of a bios for a Surface X 1876 or to clean my readed bios because I have problems with UEFI passwords.
Can somebody help me?
Leave a comment:
-
Re: I need bios dum idiapad gaming 3 Gy530/GY531/GY532 NM-C871
hi i need bios for ideapad gaming 3-15imh05 laptop type 81y4. i have no video and i suspect bios is corrupcted since i notice flux around bios chip, however i attach the bios i have read. I hope somebody can help me...Leave a comment:
-
Re: HP 15 bs DKL50 LA-E802P
thank you so much, solved with 08328.rar fileLeave a comment:
-
Re: HP 15 bs DKL50 LA-E802P
can somebody help me? i have never done this kind of operation. Thanks in advanceLeave a comment:
-
Re: HP 15 bs DKL50 LA-E802P
hi i need bios for 15-bs142nl serial number CND8097V94. I post original dump corrupted during bios update...Leave a comment:
-
Re: Toshiba 46TL950 Greenlight turns on , backlight on , nothing on screen
can i have help to have the 3 files to program a toshiba 55vl963? thanksLeave a comment:
-
Re: ASUS X555ld Rev 3.1 UMA TESTED OK
i have tried this bios and all ok apart of fan always at maximum speed i attached my original dump which give me no display. Thanks...Leave a comment:
-
Re: ASUS X541NA bios needed
What can i check?Leave a comment:
-
Re: ASUS X541NA bios needed
thanks for answare i have tried with this file but same situation apart of the first time i have white charging led and then orang.I have 3v and 5v but i don't have the 1,8v on the bios chip i verified on pin 8.Leave a comment:
-
Re: ASUS X541NA bios needed
in my case it doesn't work i have only orange charging led light even without battery and nothing appens when i press power button. i attach original file and hope somebody can help me. thanks...Leave a comment:
-
Re: Hp 650 bios
thank you so much, i have downloaded the mpm tool but my config file is not complete of information like model, serial nuimber ect. I have solved only the unlock modeLeave a comment:
-
Re: Hp 650 bios
can somebody help me to solve manifactured id problem? thanksLeave a comment:
-
Re: Hp 650
i have tried and it is ok, before i have no video with its original dump but now i have manufacter id problem at start up. i attach my original dump...Leave a comment:
-
Re: Dump ASUS X555QG Please!!
I've tried also with rt809h and so 1,8v programming but i have the same problem so i think an hardware issue but i have to rent the notebook unfortunately so i cannot try furhter. Thanks to all for supportLeave a comment:
-
Re: Dump ASUS X555QG Please!!
i have tried the bios from post #31 but i have always no video only some flashes on display, but i have to use the new rt809 programmer for this kind of spiflash? sorry but i don't understandLeave a comment:
-
Re: Dump ASUS X555QG Please!!
thanks for you answare i have understood that the problem with my new chips is that they are 25q64fv and not fw so not at 1,8v, for this reason with new spiflash pc stay off. Now i'm using a EZP2010 programmer but yesterday come my new RT809, i have to use it to program this 1,8v spiflash? ThanksLeave a comment:
-
Re: Dump ASUS X555QG Please!!
Can you help me please?Leave a comment:
No activity results to display
Leave a comment: