Hi my name is Pat first timer here, from ks. Thanks for allowing me to join your forum. As you probably guess by now i have a problem with my Philips tv model 42PFL5432D. About 3 months ago i replaced a bad cap and the tv worked fine until now. So i went thru the power board and tested the caps and replaced the bad ones. Since then i have replaced D912 that was shorted and Fuse 901 and Q901 which tested bad. I get a red light when plugged in and turns green when turned on but i don't have picture. tested the board further I don't have 24v to BL_ON only about 3.3v traced the circuit back to T905 only read 0v on one side of the transformer and 67v on the other side. So I don't know if this is the problem or if 67v is too low for a output? If anyone has an Idea I sure would appreciate the help. Your forum is full of great information thanks again.