Still on square one. What can be a possible next step? Is it worth taking it to a tv-service?
After all, it's 6 years old.
fulepost@outlook.com
Member
Last Activity: 11-26-2025, 05:31 AM
Joined: 07-20-2024
Location: Kungälv
-
I have both types and both works. I first thought there was a problem having the on/off/control-device connected, but later I realised I was wrong....Leave a comment:
-
Here are the screenshots from the service menu. Please note, it says "MODE : FAILURE" in the heading. Not that I didn't know something is failing but it might give you some more guidance.
Also, I forgot confirm I've done all the checks I could disconnecting all the ribbon cables looking for clues but all seems fine.
I don't know about the HDMI 2.1 for the source and cable. The source is new/modern so, most likely....Leave a comment:
-
Well, the seller asked for €200 and I said, for, me and 100% of us who's not really capable of repairing elektroniks, it's worthless. I promised him to send him €50 if I'm successful. He accepted that.
You very competent people in this forum is his best chase to get that money.
...Leave a comment:
-
Well, the seller asked for €200 and I said, for, me and 100% of us who's not really capable of repairing elektroniks, it's worthless. I promised him to send him €50 if I'm successful. He accepted that.
You very competent people in this forum is his best chase to get that money.
...Leave a comment:
-
Good advice. Will do that. I'm afraid my self-controlled TV might have done its own changes. It's gone nuts now....Leave a comment:
-
Leave a comment:
-
I have the same issue without any source connected. I've tried all the reset alternatives incl. reset from the service menu without luck. Same behavior when pulling the flat cables to the panel (but with black screen).
The TV:s spooky habit of controlling menus by itself seems to have accelerated. "The haunted teli."...Leave a comment:
-
I've been using a STRONG LEAP-S3 PRO androidtv device. ...but the previous owner probably used something else. I bought the TV with the issue known for €10....Leave a comment:
-
I told you I wasn't competent enough. Now I learnt it was a led driver board. Thanks. I will find my IR thermometer and do some measurements....Leave a comment:
-
Pictures uploaded. I hope the quality is good enough. It's a separate T-Con board.
Check temperature is a good idea. What's more relevant? temp on the back side of the PCB, underneath the processor or on the heat sink surface on top of it?...Leave a comment:
-
Thank you for input. If that's the reason I have to consider this Samsung lost in combat. Still, strange it seems to work fine en retail mode. I'll see if I can get it up and running in retail mode to confirm it's still the case....Leave a comment:
-
Thanks for your input. I'll see what I might be able to detect with my limited competence. Still, strange it seems to work fine en retail mode. I'll see if I can get it up and running in retail mode to confirm it's still the case....Leave a comment:
-
Samsung "QE" series QE55Q70RATXXC Intermittant restart in "home mode".
Dear all.
I'm a less knowledgable member who would appreciate some guidence.
I have a Samsung QE55Q70RATXXC that works perfectly in "shop mode" but in home mode it restarts, Intermittantly.
With intermittant I mean the TV can work perfectly for a week and suddenly start to restart. Before the restart it may reach different stages. Sometimes it restarts when the "QLED" start screen shows up and some thimes it restarts after hours, and everything in between.
When the restart occurs, the screen blacks out leaving a light area alomng the edges fading...
No activity results to display
Leave a comment: