Re: Repairing VP2030B

Thanks to the posts here, I had the confidence to repair my ailing VP2030B.
All the same symptoms- flickering at startup, then recently it started going black for a few seconds every few minutes.

The most obvious blown caps were the three 35V 180uF CapXon's on the backlight board and the two 25V 330uF Teapo's at the the ribbon-cable input of the main video board.

But for good measure, I also replaced the 6.3V 1000uF Teapo on the main video board, and the 22uF Ltec, 220uF Taicon and 470uF Ltec caps on the power board. All...