Hi all, I would ask for some help/advice. I followed Rex98 instructions and the laptop booted as expected with no password. When applying BCU settings I figured out that I also needed board CT so I shut down the laptop which was running on adapter with battery and 3.3 battery plugged off. I removed the RAM to take a picture of the CT number and then replaced the RAM, plugged in the wi-fi card then the 3.3 and then the battery since I figured I can close the lid. I booted the laptop, the hp logo showed for about 10 s and then it shut down again. Now every time I try to turn it on I first get blinking...