1280 x 1024 on a 19" Mitsubishi Diamond Pro 930SB, very nice monitor.

Thanks for the reply, but the problem was that i could only find 16mm to fit in place of the 10mm, around the cpu socket for example, so i wasn't sure if they would fit, but it seems they would fit if i bent them opposite from each other....

Thank you very much for your informative reply, it is much apreciated. I will likely order the Panasonic FC caps from RS and bend them slightly to allow for the excess diameter and then secure them with hot glue as you suggested, once again thanks a lot for your timely reply

Hi, i have a 694d pro which randomly reboots and having found your site after a search, i think that it might be a problem with the caps. I'll give you a bit of a 'back history' of the board which led me to believe it is a cap problem.

Originally i bought the board off Ebay, all was well when i was using it, it was working with two cpus no problem. Now a few months down the line i was starting to have BSODs and random restarts, so by the off chance i removed one of the cpus and the board started to work correctly again but somewhat limited with only one cpu.

When...