Re: Need Schematic for ASUS ROG GA401IV-BR9N6
this is pretty close, ga401ih, i found it to be close enough
also a png of a boardview i can't find anything better for free online. it's enough to kinda get the idea of where all the inductors are and what the differences are
strange to find something for asus that isn't in fz format though
as for your original question, it looks like l4502, all the schematic says is 120ohm no current rating but that makes no sense as the thing would be dropping nearly all the voltage and while inductors often specify...
oddbondboris
New Member
Last Activity: 04-09-2025, 02:56 PM
Joined: 06-04-2011
Location:
-
Last edited by oddbondboris; 12-07-2022, 06:00 PM. -
Re: Schematic for hp 15-s da0p5dmb8c0 Quanta 0P5
boardview and schematic attached...Last edited by oddbondboris; 11-28-2022, 05:56 PM.Leave a comment:
-
Re: Insignia ns50d510na19 tp.ms3553.pc906 power schematic
no spike, i already replaced the backlights because i've seen so many of these with bad backlights before and forgot to check
these backlights light if provided voltage but thanks, don't want someone to see this thread and think that they have a bad board when it's just the much more common ledsLeave a comment:
-
Insignia ns50d510na19 tp.ms3553.pc906 power schematic
While diagnosing one of these boards with no backlight voltage i came across a Chinese schematic fragment with a Haier logo in the top corner
it nearly perfectly matches this tv board down to the component designators
thought i'd post it here as there is little info out there on these all in one boards and obviously no schematics from insignia... -
Re: Schematic Dell Inspiron 7386
i could also use this schematicLeave a comment:
-
Re: Toshiba S55T-b5233 Bios
worksLeave a comment:
-
Re: HM HN, Dates for the bad boys?
i know this is old and all but i've got 9 nichicon hm series 6.3v 1500uF caps in a 3com 2808 gigabit switch. all the caps are datecoded 0341 and all are bad
thing lasted 8 years in a no aircon environment on 24x7 somehowLeave a comment:
-
Re: New Members - please post your introductions here
Name's Boris
I'm a engineering student and computer/telcom repair tech
I see a ton of bad parts daily and repair old stereo equipment on the side
Only thing you should know about me is that i strip parts off of EVERYTHING to test and keep. I've de-soldered to keep more caps than i've replaced and i've replaced tens of thousands. Nothing is safe from me i have over 1000 western electric caps alone from old central office equipment.Leave a comment:
No activity results to display
Leave a comment: