User Profile
Collapse
-
-
Need Serial Number from device if possible, as well as the dump (no bin attached)Leave a comment:
-
-
-
W25Q is fine, and the dump looks whole. Do you need the password cleared?...Leave a comment:
-
-
I don't need it cleaned or replaced or anything, I just wanted to know if ripping the firmware from the EC region on that Lenovo dump that you attached in post #5 would be sufficient to use for the same laptop! My apologies for the confusion. It's all the exact same board and revision (LA-N591P Rev 1.0), but the ec is actually dead (3.3v LDO shorted out and 3.3v BC burned) so I am unable to dump the firmware from it. The chip is an IT8218VG-256...Leave a comment:
-
Hey I wanted to ask something about this for clarification:
The EC chip on this board is 256KB. I am only wondering because for 256KB I usually start from the top of the firmware, and then select blocks starting from the first bit, and the hex length selected is 20000. For 256KB, I'd assume I'd just double that (length of 40000)? (I'm new to re-writing ECs and have only re-flashed 128kb models)
I attached the dump just in case, but I have a friends laptop with a short on the EC. We're going to have to replace this chip, but I want to be sure that I have a proper backup...Leave a comment:
-
Found this online. Hopefully this is what you're looking for...Leave a comment:
-
-
Amazing Thank you SOOOOOOOOOOOOOOO MUCH! So HQEE is the var that I should be looking for in order to find the Serial information (at least, with this specific mobo)! I originally just wanted to move over identifiers over to a new bios (incase there was NV corruption), as well as a fresh ME but got stuck on locating the identifiers. I never considered the fact that there was no descriptor, nor ME region present in UEFITools. I will save this information as I deal with these devices constantly. The password isn't important here (Though this is also important info to know) as I just wanted to ensure...
No activity results to display
Show More
...
Leave a comment: