I'm working on this TV which was stuck on a flashing green/red light with no picture. Everything seemed to point to a motherboard issue, so I changed that out with a new motherboard.
The TV worked perfectly well for 30mins to 1hr at which point the picture went again.
UART dump shows these two lines:
[IsOLEDPanelLocked] : gPanelLocked = 0x3 !!!
[read_dbtable]OLED PANEL LOCK, not to init panel .!! !!!
UART dump from when the TV was working was:
[IsOLEDPanelLocked] : gPanelLocked = 0xFF !!!
Anyone experienced with mboot knows what is going on, why this lock got set and how it can get unset?
Thanks.
The TV worked perfectly well for 30mins to 1hr at which point the picture went again.
UART dump shows these two lines:
[IsOLEDPanelLocked] : gPanelLocked = 0x3 !!!
[read_dbtable]OLED PANEL LOCK, not to init panel .!! !!!
UART dump from when the TV was working was:
[IsOLEDPanelLocked] : gPanelLocked = 0xFF !!!
Anyone experienced with mboot knows what is going on, why this lock got set and how it can get unset?
Thanks.