Hey,please can someone help me to remove password or put it to default 123456 from this bin file? i can`t do nothing else...is a dvr i try to reset it but not working...
DVR Veyo forgot password
Collapse
X
Related Topics
Collapse
-
by pb1911ntHello forum,
I'm still relatively new to the world of electrical repairs.
I have a Macbook here that I can't figure out
When the battery is gone, the USB input consumption goes up to 20 V and 0.06A. But it breaks down after about 2-3 seconds and you can also hear a small ticking on the logic board. But I can't pinpoint it exactly.
I removed the logic board and took a few measurements.
But I can't really figure it out.
At first I thought the infamous CD chip was defective - but then of course you read more on the internet...09-07-2025, 11:35 AM -
by namelemen32I have HP Compaq dx6120 i need to reset my bios password.I tried some methods like using CMOS button but it did not work so my last chance is using SMC.bin.
Serial Number : SAA62408WR
P/N: EC893ES#ABV-
Channel: BIOS & Schematic Requests!
-
-
Hello,ššš
I need help unlocking the BIOS password on my HP ProBook 11 G2 laptop.
š§ Model: HP ProBook 11 G2
š¦ Serial Number: 8CG72478MY
š UUID: 6F5ED686-5532-11E7-A2E2-911C6404E011
š BIOS Status: Locked with password
The laptop is no longer under warranty and HP refused to help me.
Iām looking for a custom SMC.bin file.
I don't have a CH341A programmer, so it's difficult for me to provide a BIOS file.
Thanks a lot for your help!ššš...-
Channel: BIOS Requests ONLY!
-
-
by lefou486Hello,
I made a big mistake
I put a password for BIOS & i don't find it
I use a random password generator & I neted the password before put into the bios
Everything works OK until i want to change an option in my BIOS
password is wrong
I don't understand
How reset this password ?
Thanks for your help-
Channel: BIOS Requests ONLY!
-
-
by outsiderHello
I removed the BIOS password thanks to the help of one of the friends of this forum.
https://www.badcaps.net/forum/troubl...61#post3637661
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.