Olevia 232 s12

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • billjhs
    New Member
    • Jan 2009
    • 1
    #1

    Olevia 232 s12

    Hello to all,
    I know this has probably been beaten to death, but I have an Olevia that had the power up problem, someone else has changed the entire power supply module, but it still doesn't power up. I checked for voltages, but only have 5 volts on one line coming from the supply. I check at the power switch and I have the 5 volts on one side. When I hit the switch it drops down to 3.2 volts,
    I assume that the main board controls the rest of the power supply and it must be pulling the 5 volts down???? Any help>?
    THanks
    Bill
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • sam_sam_sam
      Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
      by sam_sam_sam
      I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

      One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
      03-31-2024, 02:12 PM
    • shovenose
      Ubiquiti Unifi PoE Switch US-8-150W Power Supply Failure
      by shovenose
      Got this one for free because, well, it no worky.

      A little research and there are tons of complaints all over forums/the internet about premature failure of these switches. The observation everyone makes about these is "they run hot" and failure occurring as soon as 13 months, right out of warranty, of course.

      Upon removal of the cover I found a G0398-15011480A power supply that, when plugged in, was making a constant ticking noise. Multimeter confirmed the PSU was the issue. Output was cycling between 0 and about 20V. With output disconnected it sat around...
      08-11-2021, 01:26 PM
    • Document Archive
      Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) V 10 Specification for Upgrade or Repair
      by Document Archive
      This specification for the Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Switch V 10 SW5-017P boardview and Switch V 10 SW5-017P schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...
      09-06-2024, 05:30 AM
    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      ORIGINAL POWER SUPPLY BOARD
      7 Photos
      11-22-2024, 01:46 PM
    • sam_sam_sam
      MPJA 10 AMP @ 0 to 30 Volts Switching Power Supply Cap Fault
      by sam_sam_sam
      I have this 10 amp 0 to 30 volt switching power supply that decided to have a 630 milliamperes draw on it at 0 volts

      I open it up to find non brands name capacitors in it

      I am not sure how this switching power supply is set up

      Could someone please explain how this power supply works

      Here is the capacitor ESR results

      (1) 47uf@50 volts 0.46
      (2) 47uf@50 volts 0.45
      New 47uf@50 volts 0.35

      (1) 100uf@25 volts 0.34
      (2) 100uf@25 volts 0.35
      New 120uf@50 volts 0.08

      (1) 220@25 volts 0.13...
      10-21-2018, 10:02 AM
    • Loading...
    • No more items.
    Working...