Hello,
Replaced the BN44-00341B I46F1_AHS Samsung BN44-00341B Power Supply / Back light Inverter (I believe it is new)
And the TV now works again.
My question is:
Should I replace all the Samwah (SP) caps on the new board to preemptively forgo any future problem? The board was made in 2010.
Why I question changing the caps, you ask? I pulled all the caps off the original board and they all test good (low ESR within Uf).
Soldering new caps is not an issue, however, I don't want to void the new boards warranty (How long? Not sure, Chinese company. Cradeal?).
Thoughts?
Replaced the BN44-00341B I46F1_AHS Samsung BN44-00341B Power Supply / Back light Inverter (I believe it is new)
And the TV now works again.
My question is:
Should I replace all the Samwah (SP) caps on the new board to preemptively forgo any future problem? The board was made in 2010.
Why I question changing the caps, you ask? I pulled all the caps off the original board and they all test good (low ESR within Uf).
Soldering new caps is not an issue, however, I don't want to void the new boards warranty (How long? Not sure, Chinese company. Cradeal?).
Thoughts?
Comment