Samsung ps42q96hd clicking

[flocko]

Re: Samsung ps42q96hd clicking

Am a Les Paul man check

[tw2005]

Re: Samsung ps42q96hd clicking

Guess who also does an exchange repair service for the BN44-00161A power board on eBay to? you guessed already haven't you!

playing that trumpet of yours again Flocko

[flocko]

Re: Samsung ps42q96hd clicking

Guess who also does an exchange repair service for the BN44-00161A power board on eBay to? you guessed already haven't you!

[tw2005]

Re: Samsung ps42q96hd clicking

sorry mate
And on the topic of pannys OMG i just repaired a Panasonic TX-P42S30B with a faulty TNPA5349 that Flocko kindly supplied me,the ribbons are a pain especially with my sausage fingers took me ages to get it right but all good now

No harm,

Flocko, must be making a killing on those SNs. LOL, I guess the thick sausages.

Some of those S30 boards can be a real simple fix, not sure about the SN,

[sordids999]

Re: Samsung ps42q96hd clicking

well, not always. Just that i have the big brother to it and clickity click with dead FETs. A gut feeling, just felt a little left out when I saw no reply.

we've all probably at some stage think we've checked it out to find we missed something. Wish there were more dead plasma pannys, much more at home with those.

sorry mate
And on the topic of pannys OMG i just repaired a Panasonic TX-P42S30B with a faulty TNPA5349 that Flocko kindly supplied me,the ribbons are a pain especially with my sausage fingers took me ages to get it right but all good now

[tw2005]

Re: Samsung ps42q96hd clicking

yes i know your right again

well, not always. Just that i have the big brother to it and clickity click with dead FETs. A gut feeling, just felt a little left out when I saw no reply.

we've all probably at some stage think we've checked it out to find we missed something. Wish there were more dead plasma pannys, much more at home with those.

[sordids999]

Re: Samsung ps42q96hd clicking

yes i know your right again

[tw2005]

Re: Samsung ps42q96hd clicking

tv working again found one shorted FQPF9N50C transistor QX801

well done, but that was what i was trying to suggest with my earlier response. anyway, perserverance wins and sure to be good fault finding history for the next victim.

[sordids999]

Re: Samsung ps42q96hd clicking

tv working again found one shorted FQPF9N50C transistor QX801

[tom66]

Re: Samsung ps42q96hd clicking

Needs to be 5V, is the cap on that rail OK?

[sordids999]

Re: Samsung ps42q96hd clicking

standby is 1.18 volts and if i ground PS-on the relay clicks in but its like a machine gun clicking

[flocko]

Re: Samsung ps42q96hd clicking

Check the caps you changed have you got them in the right way round? check to see if with all boards unplugged the voltages come up, first , check you have stand by 5v, then ground Ps On , relay should click in and all small voltages should come up, lastly if you still have the relay in jump VS On to STBY though resistor, this should bring VS voltage up, if you hear the relay click in and out when PS ON is grounded the problem will be with the two smaller Fets, if it happens with VS on it the larger Fets when testing the Fets for shorts remember that you will see about 12ohms across the outside legs and if you have to replace the Fets also replace the SMD diodes and resistors. Flocko

[tom66]

Re: Samsung ps42q96hd clicking

Sounds like your power supply is being problematic then.

[sordids999]

Re: Samsung ps42q96hd clicking

ok control/main-board disconnected
PS ON grounded, VS ON to 5V thru resistor (100 - 1000 ohm will do)
and im now getting a fast paced clicking sound

[tom66]

Re: Samsung ps42q96hd clicking

Same with all other boards removed (incl control board?)

[sordids999]

Re: Samsung ps42q96hd clicking

Yes I mean that. So you do not get Vs/Va?
Remember on Samsung, PS ON grounded, VS ON to 5V thru resistor (100 - 1000 ohm will do)

done that tom but still clicking

[tom66]

Re: Samsung ps42q96hd clicking

Yes I mean that. So you do not get Vs/Va?
Remember on Samsung, PS ON grounded, VS ON to 5V thru resistor (100 - 1000 ohm will do)

[sordids999]

Re: Samsung ps42q96hd clicking

Do you mean disconnect the cable with the PS ON/VS ON going to the control board then jumper PS ON/VS ON if yes then still the same

[tw2005]

Re: Samsung ps42q96hd clicking

sounds like the FETs have failed for Va,Vs. It's usually the FETs that have the cracked solders. I have a 50" version and that's where it ended up blown FETs and just relay clicks

[tom66]

Re: Samsung ps42q96hd clicking

You need to isolate the main - jumper PS ON and VS ON on the connector directly