Hi guys one of my first post not sure if I'm doing everything properly so forgive me if I'm doing this wrong but I have a Samsung 42 inch plasma don't know what's wrong with it and I'm new to electronics so bear with me. The plasma I believe powers on normally meaning the led for the power button (which is blue) turns on blinks for a few seconds then turns off. You can hear the TV running which I mean power running through but no video or audio besides a tune once you power on the TV. The screen doesn't appear to be cracked I do see some pixels in the top left corner flickering but its hard to see in the light.
I don't know where to go from here. I have looked at tom66 guide for trouble shooting plasmas and I think its the Y-main or buffer. I did not see any bad capacitors or anything burnt or blown. I will try to post as many pics and a video on what is happening once I figure how to use the forum.
I don't know where to go from here. I have looked at tom66 guide for trouble shooting plasmas and I think its the Y-main or buffer. I did not see any bad capacitors or anything burnt or blown. I will try to post as many pics and a video on what is happening once I figure how to use the forum.
Attached Files