Hi,
I have a Technosonic LCD3251 HD TV and the display is garbled. The OSD menu is also garbled.
I've already done some googling and apparently there are several common faults with this model. I'm just wondering if anyone here has seen this before and can say something like "Yeah - I had one exactly like that - try replacing C122 on the main board" - before I take it down the dump !
I've videoed the display and you can see it in all its glory here:-
http://youtu.be/iiDs9o8WvQo
The only other thing I can add is that when you power it on, the standby/power LED flashes twice quickly then either four or five times more slowly. I say either because I'm sure it was five, but the last time I tried it I'm sure it only did four :-)
Many thanks folks !
Cheers,
Kev.
I have a Technosonic LCD3251 HD TV and the display is garbled. The OSD menu is also garbled.
I've already done some googling and apparently there are several common faults with this model. I'm just wondering if anyone here has seen this before and can say something like "Yeah - I had one exactly like that - try replacing C122 on the main board" - before I take it down the dump !
I've videoed the display and you can see it in all its glory here:-
http://youtu.be/iiDs9o8WvQo
The only other thing I can add is that when you power it on, the standby/power LED flashes twice quickly then either four or five times more slowly. I say either because I'm sure it was five, but the last time I tried it I'm sure it only did four :-)
Many thanks folks !
Cheers,
Kev.