It seems I have a LN46B610 Samsung 46 inch that supposedly didn't have a jumper cut before it left the factory. This happened to millions of units I have heard. I've been reading tutorials that say to cut either the JP852 or JP854 depending on which one.
Neither of those two jumpers have a bent line underneath indicating they should be cut and neither of them are near the input rating box. I also do not see COLD anywhere either. I can take some pictures if that helps.
If anyone has any idea I would be extremely grateful.
Neither of those two jumpers have a bent line underneath indicating they should be cut and neither of them are near the input rating box. I also do not see COLD anywhere either. I can take some pictures if that helps.
If anyone has any idea I would be extremely grateful.