Panasonic Plasma TC-P50VT20 Display Issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Audioplus
    Senior Member
    • Feb 2012
    • 157
    • USA

    #1

    Panasonic Plasma TC-P50VT20 Display Issue

    Exhibiting off color rectangular square in front left corner of panel, appx 12" x 6"
    Rest of display looks fine, Main PC board, Control board, Buffer board ? Anyone with any ideas is appreciated!
    Or a bad panel?


    Dan C
    Last edited by Audioplus; 07-08-2014, 01:10 PM.
  • tw2005
    Badcaps Legend
    • Oct 2011
    • 6457
    • Australia

    #2
    Re: Panasonic Plasma TC-P50VT20 Display Issue

    Originally posted by Audioplus
    Exhibiting off color rectangular square in front left corner of panel, appx 12" x 6"
    Rest of display looks fine, Main PC board, Control board, Buffer board ? Anyone with any ideas is appreciated!
    Or a bad panel?


    Dan C
    I think a picture would help. Another thing to help work it out would be to read the service manaul and enter service mode. In there you go to option, then mirror. You can then flip the image horizontally and vertically.

    If this rectangle remained in the same position then that eliminates the main and digital boards. that would leave the panel or the boards that drive it as possible causes.

    Last edited by tw2005; 07-09-2014, 06:49 AM.

    Comment

    • Audioplus
      Senior Member
      • Feb 2012
      • 157
      • USA

      #3
      Re: Panasonic Plasma TC-P50VT20 Display Issue

      It was a C6 Buffer Board, success

      Comment

      Working...