Announcement

Collapse
No announcement yet.

Need help with Samsung HP-S4253

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Need help with Samsung HP-S4253

    Hello Guys,


    My name is Adam and I like fixing things. I usually work on cars, but once in a while I like to tackle electronics. My expertise with TV's is limited o the voltmeter, swapping components and replacing caps


    So, I haven't used this TV in a few weeks. I turn it on and well it looks like crap. The whole screen is covered with random colored pixels. After the set warms up the picture improves a bit. There is two areas of the screen that are distorted. The top and a wide horizontal bar towards the bottom, which changes with the resolution.

    The picture below shows it on 1080i




    on 480i the bottom bar goes away.

    Any ideas? I'm thinking it's the mainboard as the OSD is not affected.
    Tags: None
    #2
    Re: Need help with Samsung HP-S4253

    Originally posted by adam699 View Post
    Hello Guys,


    My name is Adam and I like fixing things. I usually work on cars, but once in a while I like to tackle electronics. My expertise with TV's is limited o the voltmeter, swapping components and replacing caps


    So, I haven't used this TV in a few weeks. I turn it on and well it looks like crap. The whole screen is covered with random colored pixels. After the set warms up the picture improves a bit. There is two areas of the screen that are distorted. The top and a wide horizontal bar towards the bottom, which changes with the resolution.

    The picture below shows it on 1080i

    on 480i the bottom bar goes away.

    Any ideas? I'm thinking it's the mainboard as the OSD is not affected.
    Definitely a problem on the main board, probably in the scalar circuitry; maybe the chip itself, maybe a memory chip. I'd say replace the main board.

    PlainBill
    For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

    Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

    Comment

      #3
      Re: Need help with Samsung HP-S4253

      I'm having a hard time finding a replacement board at a reasonable price, is there any way to fix it? The flash memory chip looks like it has some residue on it "looks like sweat" I was wondering if there is a way to reload the firmware to see if it would help, however I can't seem to find any firmware updates on the samsung website.

      Comment

        #4
        Re: Need help with Samsung HP-S4253

        So, the main board in my TV is part# BN94-00859A I found BN94-00859B, any idea what the difference is and if it will work?

        Comment

        Previous template Next
        Working...
        X