Canon G3400 dump
Hello guys,
Does somebody has this dump for 25Q64 and 25Q16?
Thank you in advance
Does somebody has this dump for 25Q64 and 25Q16?
Thank you in advance
-
-
Re: Canon G3400 dump
up -
Re: Canon G3400 dump
Try this two dump
this dump is okComment
-
Comment
-
Hi one question first time i flash with dump for canon 3400
when i soldered the chip first to clear everything on and than write the dump from this site on boat chips or i must do recovery thet file what is on chipComment
-
Heloo. I need good dump for Orion CLB22RT500d . My dump is corrupt , continous restart .
Mainboard is T.SIS231.31 , with 25q64 eeprom .
Display : T215B1-P01-L05
I atached here corrupted dump .
Thanks in advance !...11-18-2024, 11:19 AM -
Dear folks, recently got a canon dr-1210c and it worked perfectly just for one day. Right now it shows all possible errors on the screen and do nothing. I tear down the device and found a 32 pin plcc flash chip. I thought reprogramming firmware might be helpful. The firmware update file from canon support include a dll file which doesn't help. So if anyone has the dump it would such a great favor to share.04-15-2025, 02:43 PM -
Any chance, that a member has a dump file for Canon MG2570S. maybe someone can share. I prefer a working dump..TIA01-17-2025, 06:31 AM -
hi i need dump canon mx475 UE versión. Not entry in service mode, need reset absorber. thanks
05-09-2025, 11:15 AM -
good new dump 47pages for canon TS3440 دامب جديد 47 صفحة - طابعة كانون...12-07-2024, 01:44 AM
Comment