Chasing schematics & boardview HP laptop model 14s-dq3029TU, board model DAOPAKMB6FO
Gidday from Downunder,
Chasing the Schematics and also the board view for the HP Laptop board, model
according to the board markings that is read sideways against the the side frame to the graphics card or the DDR4 slot it says the following for the Model,
“MODEL:OPAK”
Then assuming the card was still inserted into the slot, releasing the card and removing it will reveal the full markings printed on the board (not the card),
“DAOPAKMB6FO REV:F”
Below in smaller print is a small logo of I think a backwards R with the letter U with the left stroke of the U and the Back part of the R joined as 1 (will send attached picture to make sense of what I mean,
After the logo is printed,
“SH10 94v-0”
Under that then says,
E248779
Then under that says,
222 1..
VGT - VGT
On the underside of the board will be printed with the same
“DAOPAKMB6FO REV : F” marking.
Hope this post is well worded and easy to understand and anything I have missed or could do better please let me know as this is my first thread in this forum for BadCaps.net so I am fresh off the boat (fresh ON the boat in this case lol)
Thanks in advance for any help with this request.
Any direction you suggest to follow up with will also be of great help and will be able to check out in advance on other projects as well so I am green in the field though believe myself quite capable with making the repairs and just need to get my hands on the right schematics and layout and use the correct information for the job at hand
I enjoy the learning as you go approach to things so let me have at it if you will,
Cheers
Nathan
Chasing the Schematics and also the board view for the HP Laptop board, model
according to the board markings that is read sideways against the the side frame to the graphics card or the DDR4 slot it says the following for the Model,“MODEL:OPAK”
Then assuming the card was still inserted into the slot, releasing the card and removing it will reveal the full markings printed on the board (not the card),
“DAOPAKMB6FO REV:F”
Below in smaller print is a small logo of I think a backwards R with the letter U with the left stroke of the U and the Back part of the R joined as 1 (will send attached picture to make sense of what I mean,
After the logo is printed,
“SH10 94v-0”
Under that then says,
E248779
Then under that says,
222 1..
VGT - VGT
On the underside of the board will be printed with the same
“DAOPAKMB6FO REV : F” marking.
Hope this post is well worded and easy to understand and anything I have missed or could do better please let me know as this is my first thread in this forum for BadCaps.net so I am fresh off the boat (fresh ON the boat in this case lol)
Thanks in advance for any help with this request.
Any direction you suggest to follow up with will also be of great help and will be able to check out in advance on other projects as well so I am green in the field though believe myself quite capable with making the repairs and just need to get my hands on the right schematics and layout and use the correct information for the job at hand
I enjoy the learning as you go approach to things so let me have at it if you will,
Cheers
Nathan
Attached Files