I need the schematic for a 2019 Acer Nitro 5 AN517-51-56YW, I have looked everywhere and found nothing.
-
-
Anyone know where I can find schematics?
I am looking for the schematics for an Acer Nitro 5 An517-51-56YW 2019 model and am wondering where I could find them. -
Re: Need Acer Nitro 5 AN517-51-56YW Schematic
Post the silkscreened motherboard part number.
https://www.badcaps.net/forum/showthread.php?t=88758
1.1.3 Motherboard model numberComment
-
Re: Need Acer Nitro 5 AN517-51-56YW Schematic
It says LA-H501PComment
-
Re: Need Acer Nitro 5 AN517-51-56YW Schematic
The schematic is posted here: https://www.badcaps.net/forum/showthread.php?t=91811Comment
-
Re: Need Acer Nitro 5 AN517-51-56YW Schematic
Thank you so much! you're a life saverComment
-
Re: Need Acer Nitro 5 AN517-51-56YW Schematic
Hi guys,
i need help acer nitro 5 AN515-54
short circuit at +5VALW.Comment
-
Comment
-
Acer Aspire V Nitro VN7-792G Laptop Schematic...10-18-2024, 10:01 AM
-
Acer Nitro 5 A715-41G A715-41 Laptop Schematic
FH5VQ LA-J812P...10-08-2024, 03:47 AM -
Acer Nitro 5 Gaming Laptop AN517-52 Schematic
LA-J871P...10-04-2024, 06:40 AM -
Hello everyone,
I am working on an Acer Nitro 5 AN515-46, board HH51R LA-M002P Rev: 1A with an AMD CPU and Insyde Bios rev 5.
Short issue description: BIOS does not recognize any of the DMI data.
History of the laptop:
The seller of the laptop said that it shut down during a BIOS update.
I bought in in a condition where it turned on but did not post.
While waiting for my RT809F to arrive, I tried to perform a Crisis recovery, which messed up the EC firmware, so... the laptop stopped even turning on. Power and Charging LEDs didn't work either... -
There were no short circuit detected on the 19V, main power rail of the motherboard. However, when the adaptor was plugged in and the voltage reading taken, it was identified that the voltage wasn't going beyond the first power mosfet and unto the rest of the motherboard.
An identical mosfet was found and removed from an acer nitro 5 donor board, the faulty mosfet was swapped out and the voltage reading was again measured. This time, voltage was passing through the replacement mosfet, but the unit still wouldn't turn on or charge. It was then observed that an IC was overheating on...
Comment