Hi, pls I need this boardview.thks for you help.
regards, to all of you..
regards, to all of you..
-
Hi Guys,
I need a motherboard schematic for file for a AORUS 15P XC please. The EXACT motherboard is ga-rx5lxc rev2.0. It currently has a black screen issue and doesn't display to external display but boots into windows and can also display externally when running ubuntu. If anyone has a motherboard schematic file and boardview for this laptop it would be greatly appreciated. Thanks in advance!05-01-2025, 01:45 PM -
Hello I think I broke my motherboard when trying to upgrade the Ram!
I made some shortcut when pluggining the battery connector because the thiny metal goes over nearest components and made sparks.
The laptop won't poweron anymore so I need to check the motherboard to reveal if there is any shortcut.
Could be great if some of You can share boardview for my motherboard FX516PC r6.0
Thanks.
Giuliano.... -
BoardView files for MSI MS-7B39.
All Revisions
Both (.CAD) and (.PCB) files included.
This is the BoardView for the "Valve Steambox Motherboard"...04-09-2025, 02:53 AM -
Hello fellows,
I am putting a feeler out for a schematic (or ideally boardview) for the Biostar B660-T Silver motherboard.
I had let my guard down and decided to trust the Biostar supplied Windows based BIOS flash tool, only to find that the system would not POST upon restart.
no problem I thought - I would just flash using my trusty CH341 and be on my merry way.
Upon inspecting the board and locating its Winbond NOR, I found it in a rather precarious spot nestled between the RAM slots and PCIe slot and right next to a rather meltable-looking...12-13-2024, 09:37 PM -
Hello everyone,
I recently came across an HP Probook 445 G11 that does not seem to boot.
When power is plugged, the fan starts to spin at full speed, and nothing else happens.
If anyone knows where I can find a schematic or boardview for this laptop, that could be great (although I know it's quite recent).
The specific motherboard model I have is the DAX8VPMB8E0, Revision E.
Thanks !10-09-2025, 06:51 AM