Ipad Pro 3rd Gen. 11" (A2459) boardview/schematics needed

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • unimatrix93
    Badcaps Veteran
    • Oct 2021
    • 339
    • Magyarország
    #1

    Ipad Pro 3rd Gen. 11" (A2459) boardview/schematics needed

    Hello everyone,

    I replaced the screen on my iPad and since then the battery indicator shows 0%, although it taking charge according to my amp meter.

    Tags: None
    • mon2
      Badcaps Legend
      • Dec 2019
      • 13836
      • Canada
      #2
      Is it possible that you have misplaced or not mounted the screw for the battery connector?

      The screw is needed to properly compress onto the battery pack connector for the contacts.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • GeirAndersen
          iPad .pcb file collection
          by GeirAndersen
          I tried searching the forum for whether this has been uploaded already, but couldn't find them (as a collection).
          Here's a dump of a bunch of iPads, I've split into 2 archives to get under file limit

          IPAD COLLECTION 1
          +---iPad mini1 820-3400(A1432) 820-3243(A1454?A1455)
          +---iPad mini2 820-3683(A1489) 820-3684(A1490?A1491)
          +---iPad mini3 820-00008(A1599) 820-00002(A1600)
          +---iPad mini4 820-00180(A1538) 820-00177(A1550)
          +---iPad mini5 820-01591(A2133) 820-01495(A2124?A2125?A2126)
          +---iPad Pro 12.9-4-820-01797(A2229) 820-01798(A2069?A2232?A2233)...
          12-09-2024, 09:28 AM
        • rmfr1225
          Surface PRO 7 Plus 1960 Boardview needed
          by rmfr1225
          Hello everybody,

          I have the schematics already of this device but no boardview and it is being very difficult to locate the fault.

          I have +3P3VAS but then nothing else, I suspect something related with 1V8 regulators, but without boardview it is very difficult to locate those components and or pads to test.

          Does somebody has the boardview of this model? Or can point out where to test?

          Thanks!
          05-12-2025, 03:29 AM
        • gilad123
          iPad Pro model A2459 Identify a component
          by gilad123
          Hello
          I have an iPad Pro model A2459
          Its backlight does not work. After opening the iPad, everything looks normal except for three components that are on the back of the screen near the flexible cable. I can't find any info on them model/value?
          Does anyone know?
          Thanks
          ...
          05-16-2024, 11:37 PM
        • chakey
          Boardview needed for HP pavilion 15 DK LA-H463p
          by chakey
          Hello, if someone have boardview for HP Pavilion 15 dk , marking on board is HP Pavilion 15 Compal FPC52 LA-H463P Allegro. I have schematics from HP Pavilion Gaming 15 GPC50 LA-J643P rev 1.0 and power button connector and transistor Q80 corresponds to my board and found one boardview file in cad format for LA-H462P and seems that its the same but I don't have actual traces inside or I don't know how to see that from this file.


          ​...
          04-16-2025, 06:35 AM
        • Loading...
        • No more items.
        Working...