Hi all, I am trying to repair a motherboard of a DELL XPS 13 9370 i7 16GB RAM that I bought. The seller misled me with the state of the equipment and it turns out that they have put an ape with a tin soldering iron in his hand doing nothing on this board.... there are several components moved out of place and many others fail. I have many boards of all kinds saved to donate components and this way I will recover it, at least try with everything. In this case I am fortunate to have enough time to try. The information of the board is;
EDO30
LA-E672P
Rev:1.0(A00)
2018-10-25
I have found on the forum something similar but for XPS 13 9380, comparing the .cad with my board there are certain differences and I am very afraid to screw up, I don't want to burn the board because I don't have money to buy another one... the damage caused by the pig's hoof that touched the board before seems to be only on the processor side... examining the CAD of the XPS 9380 I have checked some things and I am quite hopeful to be able to recover it because it is quite evident where they have been touching... it is quite noticeable. The computer when plugged in does absolutely nothing and in fact thanks to the file that was here in the forum I have already replaced a coil, but I'm quite afraid of messing up so I'm careful, if someone could provide a datasheet and the boardview would be great and I would be very grateful.
Thank you very much in advance and greetings to all of you.
EDO30
LA-E672P
Rev:1.0(A00)
2018-10-25
I have found on the forum something similar but for XPS 13 9380, comparing the .cad with my board there are certain differences and I am very afraid to screw up, I don't want to burn the board because I don't have money to buy another one... the damage caused by the pig's hoof that touched the board before seems to be only on the processor side... examining the CAD of the XPS 9380 I have checked some things and I am quite hopeful to be able to recover it because it is quite evident where they have been touching... it is quite noticeable. The computer when plugged in does absolutely nothing and in fact thanks to the file that was here in the forum I have already replaced a coil, but I'm quite afraid of messing up so I'm careful, if someone could provide a datasheet and the boardview would be great and I would be very grateful.
Thank you very much in advance and greetings to all of you.
Comment