Microsoft Surface 7 + UEFI lock

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • volinakis
    replied
    Originally posted by rusgard

    Still ask for password
    good joke, verify if you wrote the right file, the one I modified it.

    Leave a comment:


  • volinakis
    replied
    Originally posted by Poutx

    Hi Volinakis , sorry for it , you will find the dump bios here and thanks a lot .
    try
    Attached Files

    Leave a comment:


  • rusgard
    replied
    Originally posted by volinakis

    I thought you "fixed" it and you don't need help anymore. try.
    Still ask for password

    Leave a comment:


  • Poutx
    replied
    Originally posted by Poutx
    Hi everyone, i have a Surface Pro 7 and UEFI is blocked by a password , I read the guides on this forum but nothing .
    Surface pro 7,
    Model number: 1866
    SN: 035515205253
    UEFI system: 17.200.140
    Touch Firmware: 3.1.65.139
    SA Controller: 14.800.139
    PD Controller: 3.6.1,
    Intel Management Engine: 13.0.2376.2.
    Thank you ​
    Here the dump bios updated
    Attached Files

    Leave a comment:


  • Poutx
    replied
    Originally posted by volinakis

    you have to upload bios dump.
    Hi Volinakis , sorry for it , you will find the dump bios here and thanks a lot .
    Attached Files

    Leave a comment:


  • volinakis
    replied
    Originally posted by rusgard

    Please help
    I thought you "fixed" it and you don't need help anymore. try.
    Attached Files

    Leave a comment:


  • rusgard
    replied
    Originally posted by rusgard
    Hi, please help to unlock uefi on Surface pro 7
    model 1866
    Serial 021465393853
    Please help

    Leave a comment:


  • volinakis
    replied
    Originally posted by Poutx
    Hi everyone, i have a Surface Pro 7 and UEFI is blocked by a password , I read the guides on this forum but nothing .
    Surface pro 7,
    Model number: 1866
    SN: 035515205253
    UEFI system: 17.200.140
    Touch Firmware: 3.1.65.139
    SA Controller: 14.800.139
    PD Controller: 3.6.1,
    Intel Management Engine: 13.0.2376.2.
    Thank you ​
    you have to upload bios dump.

    Leave a comment:


  • Poutx
    replied
    Hi everyone, i have a Surface Pro 7 and UEFI is blocked by a password , I read the guides on this forum but nothing .
    Surface pro 7,
    Model number: 1866
    SN: 035515205253
    UEFI system: 17.200.140
    Touch Firmware: 3.1.65.139
    SA Controller: 14.800.139
    PD Controller: 3.6.1,
    Intel Management Engine: 13.0.2376.2.
    Thank you ​

    Leave a comment:


  • rusgard
    replied
    Originally posted by volinakis

    SERIAL NUMBER?
    Sorry Fixed

    Leave a comment:


  • volinakis
    replied
    Originally posted by rusgard
    Hi, please help to unlock uefi on Surface pro 7
    model 1866
    SERIAL NUMBER?

    Leave a comment:


  • rusgard
    replied
    Hi, please help to unlock uefi on Surface pro 7
    model 1866
    Serial 021465393853
    Attached Files

    Leave a comment:


  • SMDFlea
    commented on 's reply
    RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
    https://www.badcaps.net/forum/troubl...sting?t=103570

    BIOS guides, methods, resources and tools
    https://www.badcaps.net/forum/troubl...rces-and-tools

  • jon pike
    replied
    hi all.
    i have a locked sp7 with an i5 by bios. tough part is the system was wiped prior or something so i have no bootable config to get windows running. However i can power up get the no boot config then presented with password i do not have.
    on the other hand I can use a system recovery drive and boot to the recovery environment, unfortunately the recover from a drive feature fails at 99% and im left with cmd, system image, as my only options. I can access regedit, notepad and the SDD but i do not know where to go from there. I continually get the password screen and i cannot remove it. Any ideas would be great. i appreciate it and your patience, as i am just learning currently.

    Leave a comment:


  • James Brooks (ThatNerd)
    replied
    Thank you for your reply.
    My last question is (I think) : (I notice the tools listed are Universal USB?)
    Do the device need to be dissembled to obtain access the bios?

    Leave a comment:


  • Vesko356
    replied
    Originally posted by James Brooks (ThatNerd)
    Am I able to read/right with software
    No.

    Originally posted by James Brooks (ThatNerd)
    or do I need a dedicated device?
    Yes.

    Originally posted by James Brooks (ThatNerd)
    If so can you recommend for me which device or software
    Read BIOS guides, methods, resources and tools​ thread to get the basics.

    Leave a comment:


  • James Brooks (ThatNerd)
    replied
    Hi,
    I see a number of user getting help with their surface devices.
    MS Surface pro 7
    S# - 071484493653
    Model - 1866

    Mine has a forgotten UEFI password

    Am I able to read/right with software or do I need a dedicated device?
    If so can you recommend for me which device or software

    thank you in advance

    Leave a comment:


  • skinner
    replied
    Originally posted by volinakis

    try
    That worked. Thank you very much.

    Leave a comment:


  • volinakis
    replied
    Originally posted by skinner
    I have a Microsoft Surface Pro 7 plus with a bios lock. Can I get some help with that?

    model 1960
    sn: 000081933153

    thanks in advance.
    try
    Attached Files

    Leave a comment:


  • skinner
    replied
    I have a Microsoft Surface Pro 7 plus with a bios lock. Can I get some help with that?

    model 1960
    sn: 000081933153

    thanks in advance.
    Attached Files

    Leave a comment:

Related Topics

Collapse

Working...