Extract bios password from EliteBook 840 G8 Bios dump, possible?

[skylinekiller]

hi, not only do you need a programmer, but the most important part is the disassembly of the PC and the IC that contains the BIOS inside; perhaps you should try to read up and do a better job of understanding what it means.

I have the laptop disassembled and my questioned had asked if there is a programmer out there where I wouldn't have to remove the chip..

[basalisco]

I have the laptop disassembled and my questioned had asked if there is a programmer out there where I wouldn't have to remove the chip..

considering the socket type and the operation to be performed, I don't think there are many alternatives, but maybe someone else with more experience could give you advice for what you asked

[k3k5]

I have the laptop disassembled and my questioned had asked if there is a programmer out there where I wouldn't have to remove the chip..

I created an adapter with a 3D printer, probe pogo pin, hot glue and jumper wire.
Everything worked and now that I have found all the information (feature byte, build ID and factory host based MAC address).

I installed the firmware from the HP driver page.

[basalisco]

I created an adapter with a 3D printer, probe pogo pin, hot glue and jumper wire.
Everything worked and now that I have found all the information (feature byte, build ID and factory host based MAC address).

I installed the firmware from the HP driver page.

I'm interested, can I share the stl file?I'm interested, I was thinking about it too, can you share the stl file?

[k3k5]

I'm interested, can I share the stl file?I'm interested, I was thinking about it too, can you share the stl file?

This is a prototype and was only tested on my mainboard.

[MOD EDIT] External link removed,added attachment to post

To flash, I used the official file "T76_01160000.bin" from HP's driver page.
https://ftp.hp.com/pub/softpaq/sp151...0/sp151275.exe

The Serial Number, Product Number, build_id and Feature Byte can be found on the inside of the cover.
The CT Number and MAC Address can be found under the memory module.

[basalisco]

This is a prototype and was only tested on my mainboard.

[MOD EDIT] External link removed,added attachment to post

To flash, I used the official file "T76_01160000.bin" from HP's driver page.
https://ftp.hp.com/pub/softpaq/sp151...0/sp151275.exe

The Serial Number, Product Number, build_id and Feature Byte can be found on the inside of the cover.
The CT Number and MAC Address can be found under the memory module.

this is the adapter that I designed, your case could be an excellent idea for containing it.

[nikola07]

Good afternoon, help me unlock the bios.
elitebook 840 g8/
sn 5CG34105CD

[nikola07]

help me with the file EC it is damaged
sn 5CG34105CD

[Orgun]

Hello friends.
I have a problem with my hp 840 G8
After updating the bios it didn't start, it just kept flashing the side light. I went to check the main dump behind the card and it was corrupted when reading. How is this possible? Is it possible to recover the main dump? help me please?


HP EliteBook 840 G8
SN: BRJ146RKMZ
ID:4Y1Y0EC#AK4
CT: BKFNA035WF638B
IEC P/N : 6037B0161911
MAINBOARD: CORVETE - 6050A3217501 - MB - A01 (A1) (1086) L2

[hoaca388]

Hello friends.
I have a problem with my hp 840 G8
After updating the bios it didn't start, it just kept flashing the side light. I went to check the main dump behind the card and it was corrupted when reading. How is this possible? Is it possible to recover the main dump? help me please?


HP EliteBook 840 G8
SN: BRJ146RKMZ
ID:4Y1Y0EC#AK4
CT: BKFNA035WF638B
IEC P/N : 6037B0161911
MAINBOARD: CORVETE - 6050A3217501 - MB - A01 (A1) (1086) L2

Unlocked

[Orgun]

Unlocked

thankyou for support

Is this to be inserted into the second eprom or both? Sorry I don't have that much knowledge. I noticed that my programmer, after injecting the bios, gives an error when doing the check at the end.

[Muhammad Faizan]

fix this error plz.

[SMDFlea]

Read the rules,post the laptop serial number

[Muhammad Faizan]

SERIAL NUMBER

[rex98]

fix this error plz.

only flash this main do not touch the EC.
first boot press f10 reset bios to factory defaults and exit, 2nd boot reset security settings to defaults.
you can permanently disable absolute in BCU. Use BCU to fill these DMI info:

Serial Number: 5CG211478Z
Product #/SKU: 3K0M1UC#UUF
CT Number: PQSNL00WBGE77Z
Description: HP EliteBook 840 G8 Notebook
BuildID: 21WWCVET601#SUUF#DUUF
Feature Byte: 3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAdUdpdqfPguhKhkjhk8mEmwn7nVngpD.4g
MAC Address : 60:6D:3C:CB:E8:AD