Microsoft Surface Pro 7 NEED BIOS. HELP!

[hepatitiz]

Hello from Germany
i have a Surface Pro 7 which only show the logo for a short time, and then restarts. It´s looping all the time.
We saved the original Bios file - maybe someone can help me with the correct original file.
best regards
Arik

[Bios Cracker]

Try and Update.

Did you tried post # 391 ???

[SMDFlea]

I put back Pro 7 on, original screen was broken. It needed a replacement

This is a bios update and firmwares extracted from the microsoft update catalog. Install from the .inf`s

[ajbernasko]

I put back Pro 7 on, original screen was broken. It needed a replacement

[SMDFlea]

I downloaded the firmware and drivers from Microsoft

Did you put the Pro 7 screen back on. It won`t work with the pro 5 screen. What was wrong with the pro 7 one, no touch,cracked screen etc ? .

[Bios Cracker]

Help me turn on the machine and the logo interrupts for 1 second. Sn032811613253

Try and Update.

[nguyendo_yen]

Help me turn on the machine and the logo interrupts for 1 second. Sn032811613253

[ajbernasko]

I downloaded the firmware and drivers from Microsoft

[Bios Cracker]

Hello, For some reason I replaced this Pro 7 screen with a Pro 5 and it's TCON but touch stopped after restart, It updated after that touch does not work with original bad screen neither with the Pro 5's. I dont know if there is a fix for this actually.

Try and Update.

[ajbernasko]

Add your serial number.

010091302753

[Bios Cracker]

Hello, For some reason I replaced this Pro 7 screen with a Pro 5 and it's TCON but touch stopped after restart, It updated after that touch does not work with original bad screen neither with the Pro 5's. I dont know if there is a fix for this actually.

Add your serial number.

[ajbernasko]

Hello, For some reason I replaced this Pro 7 screen with a Pro 5 and it's TCON but touch stopped after restart, It updated after that touch does not work with original bad screen neither with the Pro 5's. I dont know if there is a fix for this actually.

[Juan__Perez]

Unlocked

It works good! all issues disappeared and there isn't touch issue, touch is ok! I really appreciate your help!

[SMDFlea]

same(((

try these.

[steam007]

try this one.

same(((

[SMDFlea]

bump

try this one.

[steam007]

Can someone please help me? My Surface won't start properly and keeps showing the logo for about 3 seconds before nothing else happens.((((
My serial number is:001842693753

bump

[hoaca388]

My serial number is:

057861102053

Unlocked

[Juan__Perez]

Hi everyone, I had boot issues with my Surface pro 7 (blocked by password), so I charged file .bin of 40' post and it removed the BIOS password! But now sometimes it doesn't start Windows, it just freezes. I've already reinstalled Windows and tried updating all the firmware (drivers). I found it's better to work with the original BIOS file.
Would you please remove the password from my original BIOS? (i attach my file)

My serial number is:

057861102053

[SMDFlea]

Please post the laptop serial number.