Need SMC.bin for HP 1040 G1

[feherhollo]

Hi,

I need SMC.bin file for my HP Elitebook 1040 G1
It's a factory new motherboard with no password.
So I don't want to unlock the password.
I have locked the MPM before I set the board to committed mode (Branding not done) and system boot with error (Machine Not Committed...)

So I need SMC.bin file to reunlock MPM and do the Branding correctly.

Please help!

[SMDFlea]

Re: Need SMC.bin for HP 1040 G1

Only HP can give the SMC.bin .Post your 16MB and 2MB bios backups .

[feherhollo]

Re: Need SMC.bin for HP 1040 G1

Only HP can give the SMC.bin .Post your 16MB and 2MB bios backups .

I can't read and write the chips correctly
I have multiply programmers but always have difficulties to read and write this model. I don't know why. Thats why I don't want to mess with chip work in this model.

[SMDFlea]

Re: Need SMC.bin for HP 1040 G1

What models are your programmers,and part numbers of bios chips

[feherhollo]

Re: Need SMC.bin for HP 1040 G1

What models are your programmers,and part numbers of bios chips

Bios chips are winbond W25Q128FV and W25Q16FV
I have CH341A and EZP2019+ programmers with POMONA 5250 clip

[feherhollo]

Re: Need SMC.bin for HP 1040 G1

Please check the dumps...

Is this read correctly??



Its almost all FFFF

[SMDFlea]

Re: Need SMC.bin for HP 1040 G1

Plug the charger in but don`t power on the board,then try reading again. Use AsProgrammer with the CH341A,or use NeoProgrammer attached .I always desolder bios chips,the clips can be unreliable.

[feherhollo]

Re: Need SMC.bin for HP 1040 G1

Plug the charger in but don`t power on the board,then try reading again. Use AsProgrammer with the CH341A,or use NeoProgrammer attached .I always desolder bios chips,the clips can be unreliable.

I dont want to desolder a brand new board...
Asprogrammer I have.
Check the files...

[feherhollo]

Re: Need SMC.bin for HP 1040 G1

Wow now reading okay

Here are the files. Can you fix it for me?
Not in committed mode. vPRO functionality not set before locked the MPM

New files attached!

[SMDFlea]

Re: Need SMC.bin for HP 1040 G1

Try these . Edit: bios not working,deleted.