dell latitude 5501 9th generation 8fc8

[peste]

I Need help too

my Dell Latitude has Admin Password

I can't unlock it.
how do you all post the bios.zip of your laptop in here?

you need an SPI programmer..here is a video as an example...https://www.youtube.com/watch?v=DWWigscuQDY

post the S/N, post the original content of the bios chip, the motherboard model, the full name and model of the laptop,etc.

[Emirhan]

I Need help too

my Dell Latitude has Admin Password

I can’t unlock it.
how do you all post the bios.zip of your laptop in here?

[hoaca388]

Need some help removing Absolute/Computrace from a Dell 5501 Laptop. Service Tag HXLV8Y2. The chip is a 25B127D which appears to be a 16mb chip. All the other 5501 laptops I've seen have 32mb chips. Could anyone help me with this? Thanks in advance.

Find 8MB chip , post here.

[peste]

merged post..

[mikeearwood]

Need some help removing Absolute/Computrace from a Dell 5501 Laptop. Service Tag HXLV8Y2. The chip is a 25B127D which appears to be a 16mb chip. All the other 5501 laptops I've seen have 32mb chips. Could anyone help me with this? Thanks in advance.

[b4rdock]

Hello.Need help with a password for a latitude 5501

Service tag 4S5T633

try it and let me know

[Kamil_B]

Hi guys,
I changed the chipset bios on the motherboard to a new one (MX25L25673GZ41-08G), then wrote a bin file on it (attachment) and now it works perfectly.
I did it myself, but added a universal bin file - maybe it will help someone like me.

Best regards and see you next time

[khaly]

Perfect , thank you.

[danito]

Hello.Need help with a password for a latitude 5501

Service tag 4S5T633

try

[khaly]

Hello.Need help with a password for a latitude 5501

Service tag 4S5T633

[shiyab]

Universal bios backup toolkit is suitable ?

no this 32mbfile

[envy1985]

NEED DUMB

Universal bios backup toolkit is suitable ?

[Kamil_B]

Hello again,
Sorry for delay, I've tried to make a backup for the exist bios file but something goes wrong - please have a look file has lots of sequence FF. Unfortunatelly I erased this chip after I save this backup - Yes Im idiot :| . So, right now laptop Is completly dead - when I press power button I see only one amber blink from the status/power led.

So, Could I program this chip another version of bios from the similar motherboard (la-h182p)? Any collision could be happened during this? - MAC adress for example ? If not, and it will be "plug&play" maybe someone will share me of the unlocked file bios.

Or maybe you have another advise? PLEASE!!

[xander007]

Hello. Read dump of your bios via programmer and post here

[Kamil_B]

Ok, I will do that I next few hours - right now I must to take care of my children But thx guys for the quick response

[SMDFlea]

Hi there, thanks for the quick answer Do you have any working bin file for this chip?
Or maybe It will be enough If I convert exe file (from the Dell website) for the bin file via CMD ?

make a backup of the bios, then post it here.

[Kamil_B]

Hi there, thanks for the quick answer Do you have any working bin file for this chip?
Or maybe It will be enough If I convert exe file (from the Dell website) for the bin file via CMD ?

[hoaca388]

Hello Guys,
I need to recognise a chip with bios on motherboard dell latitude-5501 la-h182p-rev-01 to replace (via CH341A) bin file (bios locked).
Could someone help me? I added a photo with picture - I think this is the red one.
Second do you have working bin file for this motherboard?

And sorry for the silly question but You are my last hope to get it back my old laptop

Here

[Kamil_B]

Hello Guys,
I need to recognise a chip with bios on motherboard dell latitude-5501 la-h182p-rev-01 to replace (via CH341A) bin file (bios locked).
Could someone help me? I added a photo with picture - I think this is the red one.
Second do you have working bin file for this motherboard?

And sorry for the silly question but You are my last hope to get it back my old laptop

[Doktorall]

1st boot, press F2, write service tag, disable Absolute, save (Apply changes), restart. 2nd boot press Alt+F to exit manufacturing mode

Thank you very much, it helped! Absolute was not active