Dell Precision 7510 7710

[LBTT1121]

Unfortunately same behavior, turns on, then off, back on fans spin full blast, then shuts down - with an added twist after this ligths flash 2 amber 1 white for a few rounds, then starts up and does this in a loop.

2 amber 1 white ---> check hardware

[rddube]

Hello try this file ....

Unfortunately same behavior, turns on, then off, back on fans spin full blast, then shuts down - with an added twist after this ligths flash 2 amber 1 white for a few rounds, then starts up and does this in a loop.

[Markus1741]

Hello LBTT1121, thank you for your reply. Already tried this dump (post 101) and I get no reaction, doesn't read the power button ?? I tried several dumps, but no success. Is my original dump so corrupted it can't be fixed?

Any other solutions?

Again, many thanks!

Hello try this file ....

[rddube]

try and feedback

Hello LBTT1121, thank you for your reply. Already tried this dump (post 101) and I get no reaction, doesn't read the power button ?? I tried several dumps, but no success. Is my original dump so corrupted it can't be fixed?

Any other solutions?

Again, many thanks!

[LBTT1121]

Hello everyone,

Got this laptop without the bottom cover so I don't have the service tag number. Bios file seems corrupted because it tries to start, fans spin turns off, turns on again fans spin very fast and it turns off. Attached is the original bios dump and the info I was able to gather from under the battery and the motherboard number.

Can anyone help fix this bios?

Thank you!

try and feedback

[rddube]

Hello everyone,

Got this laptop without the bottom cover so I don't have the service tag number. Bios file seems corrupted because it tries to start, fans spin turns off, turns on again fans spin very fast and it turns off. Attached is the original bios dump and the info I was able to gather from under the battery and the motherboard number.

Can anyone help fix this bios?

Thank you!

[LBTT1121]

I tried the BIOS, but still couldn't get an image. After 1.5 amps, the device remains at a constant 1 amp. When I don't plug in the external graphics card, the current values remain the same. I installed the original BIOS, and the current values remain the same. There is no liquid contact or impact on the motherboard. I applied light heat to the external GPU chip, but the results remained the same. Can you help me find any problems I could address with this motherboard?

try post 101

[emre0634]

try and feedback

I tried the BIOS, but still couldn't get an image. After 1.5 amps, the device remains at a constant 1 amp. When I don't plug in the external graphics card, the current values remain the same. I installed the original BIOS, and the current values remain the same. There is no liquid contact or impact on the motherboard. I applied light heat to the external GPU chip, but the results remained the same. Can you help me find any problems I could address with this motherboard?

[LBTT1121]

please, can same cleane ME for my dump. TNX
reg mode:p53f
reg type no:p53f001
seri no;:6GPWNC2
LA-C541P REV:1.0

try and feedback

[emre0634]

please, can same cleane ME for my dump. TNX
reg mode:p53f
reg type no:p53f001
seri no;:6GPWNC2
LA-C541P REV:1.0

[prakashbafna]

Does anyone have solution on this issue? I also have this issue on the unit I am working now.

I solved it,do you still have problem?

[SMDFlea]

Read https://www.badcaps.net/forum/troubl...before-posting
,and post the service tag

[chelsea1155]

help me fix the bios file is shut down
model Precision 7510
la-c541p

[chelsea1155]

Bios Build Dell

thank you

[LBTT1121]

please help me fix bios file
model Precision 7510
la-c541p

Bios Build Dell

[chelsea1155]

please help me fix bios file
model Precision 7510
la-c541p

[ronelex]

Re: Dell Precision 7510 7710

Hi..i Have a Dell precision 7710 it only boots when you remove AC adapter, battery & Cmos connector, then plug in the adapter & turn on..display comes on only after 3-4 self restarts, it takes couple of minutes..is my bios bricked?

Does anyone have solution on this issue? I also have this issue on the unit I am working now.

[mbuser]

Precision 7710


Service Tag: BW3X0G2

Nothing changed, probably the problem is in hardware logics. PC have reaction to PWRBTN, but display is dark. With left USB-HDMI board (LS-C558P) connected to mother no reaction at all. Thanks for help.

[hoaca388]

Hi, everyone. I need in bios dump for 7710 with clear ME. My backup dump in attachments, I think It's corrupted (check it please). LA-C551P rev 3.0(A02). Service tag: BW3X0G2.

Precision 7710


Service Tag: BW3X0G2

[mbuser]

Hi, everyone. I need in bios dump for 7710 with clear ME. My backup dump in attachments, I think It's corrupted (check it please). LA-C551P rev 3.0(A02). Service tag: BW3X0G2.