Hi everyone,
Iโm working on a non-booting HP Envy x360 2-in-1 laptop and need verified firmware dumps for both the main BIOS and EC chip. Iโll be posting my own backups for reference and comparison.
๐ System Details
- Model: HP Envy x360 15-fe0053dx
- Product Number: 7HVO3UA#ABA
- Build ID: 23WW2GQZ6D
- Motherboard: JPR50 LA-M794P Rev: 1.0 (2023-03-03)
- Motherboard SPS: N30979-ABA
- LCD SPS: N49271-601
- Date Code: 172380
- Keyboard Type: 0
- Feature Byte:
3XeB7kN7.Ba.aqewkwBiBVuhcbdxYPgB
hZnp.praepq0Md4qkdf
๐ง Chip Info
- Main BIOS chip: Winbond W25Q128JVSQ (16MB SPI NOR)
- EC chip: Winbond W25Q80DYSIG (1MB SPI NOR, 3.3V)
โ ๏ธ Current Symptoms
- Laptop does not power on with AC adapter alone.
- When plugged in without battery, I hear a high-pitched coil whine from the board.
- Whine disappears when battery is connected, but system still doesnโt boot.
- No fan spin, no LED activity, no POST.
- Iโve already backed up both BIOS and EC chips using CH341A and will share those dumps.
๐จ What Iโve Done
- Flashed updated BIOS:
- Used HP vendor BIOS (F.11) and attempted hex modifications to merge identity data.
- Flash completed but system behavior did not change.
- Reflashed EC from backup:
- Dumped the original EC firmware from the W25Q80DY chip.
- Attempted to reflash the backup image, but erase/write operations failed due to protection bits.
- System remained in the same non-booting state.
- Tried prior BIOS from EFI partition:
- Extracted the recovery BIOS from the EFI partition on the hard drive.
- Flashed it externally, but the laptop still shows identical symptoms.
- Current state:
- AC-only power produces a high-pitched coil whine, no boot.
- Whine disappears with battery connected, but system still does not power on.
- No fan spin, LEDs, or POST activity.
โ What Iโm looking for
- Any guidance really...
- A verified working BIOS dump for this board/SKU (JPR50 LA-M794P Rev 1.0, 15-fe0053dx or similar).
- A verified EC firmware dump for the W25Q80DY chip on this board.
- Ideally from a working unit with matching or close product number (7HVO3UA#ABA or similar).
- If youโve repaired this board before and have known-good firmware, Iโd be grateful for a copy.
๐ What Iโll share
- My original BIOS dump (W25Q128JVSQ)
- My original EC dump (W25Q80DYSIG)
- Programmer details and chip IDs if needed
โMichael
Comment