Toshiba Satellite PRO (european) A50-EC stuck on dynabook logo

[Bartoloni]

Yep, found the issue is something related to the PD controller of the Type-C connector, i can bypass the waiting time adding a 56K resistor to the CC1 signal (to ground) .. this make the port useless (can be used as a 2.0 with an adapter i think) but the laptop is now starting correctly.
very thank you for the BIOS, now i'm using the one provided by you.

[SMDFlea]

the original eeprom i 127mb .. the "tecra" bios was 64mb (and also the one coming from yoo) ... SMDFlea do you think i can use a 64mb eeprom?
btw seems that right now the system is booting fast if i remove all subcards/keyboard/mouse/touchpad from teh main board (before with the original bios this is not happening)
P.S. or... the ME region is copied from the EC to and offset after the 64mb?

You can`t use a smaller size bios chip. I rebuilt your bios with the 7,680KB update extracted from the exe ,and cleaned the ME firmware. The bios is as good as i can make it. I can`t give you any more help,i think you have a hardware problem.

[Bartoloni]

the original eeprom i 127mb .. the "tecra" bios was 64mb (and also the one coming from yoo) ... SMDFlea do you think i can use a 64mb eeprom?

btw seems that right now the system is booting fast if i remove all subcards/keyboard/mouse/touchpad from teh main board (before with the original bios this is not happening)


P.S. or... the ME region is copied from the EC to and offset after the 64mb?

[Bartoloni]

Thank you SMDFlea, just flashed, but still on dynabook logo

[SMDFlea]

This laptop stay on Dynabook logo for hours (after this boots normally to windows)
i have the dumped bios, and the bios that came from Toshiba Site
these are the same version ( 2.80 )
if any one can Rebuild a new one.. or better... has a dumped one from a working machine this can be great,
i think i will replace the EEPROM to avoid issues with it.
very thank you to all you guys!

Try this bios.

[Bartoloni]

Motherboard removed, but there are just some minimal texts... (never seen something like that)

BTC-212
94V-0
E220370
Piotek P
2036

FTL6SYI
A4565A

[Bartoloni]

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

Sorry SMDFlea,
here the other data:

Satellite Pro A50-EC-1k9
Part NO: PT5A1E-1E5004IT
SERIAL NO: 21070937H
SC: A1PT5A1E11U4

I21070937HST5A11E5004ITD (BARCODE)

UUID: 807756C9-A46A-EB11-8145-C83231070937

i'm requesting to owner the rights to remove the mainboard (to retrieve the model to the back side)



P.S. the EXE file from toshiba site can be extracted using the "/extract" parameter

[SMDFlea]

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

[Bartoloni]

This laptop stay on Dynabook logo for hours (after this boots normally to windows)

i have the dumped bios, and the bios that came from Toshiba Site

these are the same version ( 2.80 )

if any one can Rebuild a new one.. or better... has a dumped one from a working machine this can be great,

i think i will replace the EEPROM to avoid issues with it.

very thank you to all you guys!