the posted bios is corrupt...
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..
.here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow
and post again..
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..
.here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow
and post again..
Comment