Lenovo Legion Y540 EC PROGRAMMING

[facta]

hello guys i don't have SIO programmer and i can't afford one right now therefore need someone with reasonable price to help me by programming an EC IT8226E-128 for
device: Laptop
brand: Lenovo
model:Legion Y540 17IRH
board number:NM C531 FY710 FY714 Rev2

[SMDFlea]

Re: Lenovo Legion Y540 EC PROGRAMMING

hello guys i don't have SIO programmer and i can't afford one right now therefore need someone with reasonable price to help me by programming an EC IT8226E-128 for
device: Laptop
brand: Lenovo
model:Legion Y540 17IRH
board number:NM C531 FY710 FY714 Rev2

Do you have access to ebay in your country you might find a preprogrammed one. Do you have any local computer/TV reapir shops,they might help if you buy a blank chip and take it to them for programming, after soldering it to the board.

.

[facta]

Re: Lenovo Legion Y540 EC PROGRAMMING

Do you have access to ebay in your country you might find a preprogrammed one. Do you have any local computer/TV reapir shops,they might help if you buy a blank chip and take it to them for programming, after soldering it to the board.

.

we have ebay access however, i have not find a preprogramed one. secondly we have computer repairs shops but no one does this ec programming because the programmers are expensive. one last thing i don't know if you are aware of this implementation on this laptop model, you can not programmed the ec while soldered on the board because the keyboard isn't directly connected to the ec but rather connected to another ITE controller chip. the only way to programme this ec is through an adapter while disoldered and solder it back after programming it.

[SMDFlea]

Re: Lenovo Legion Y540 EC PROGRAMMING

we have ebay access however, i have not find a preprogramed one. secondly we have computer repairs shops but no one does this ec programming because the programmers are expensive. one last thing i don't know if you are aware of this implementation on this laptop model, you can not programmed the ec while soldered on the board because the keyboard isn't directly connected to the ec but rather connected to another ITE controller chip. the only way to programme this ec is through an adapter while disoldered and solder it back after programming it.

The chip should program itself at first boot, found an old thread -> https://www.badcaps.net/forum/showthread.php?p=1093666 IT8226E-192 .You will have to buy a chip with the same suffix as yours