Dell Precision 3570 - Help With Component Identification!

[iKonTech]

Any buddy no what this oscillator is i believe it is as there is a HZ a little below it long story short the stenciling on this board is off and i should of took pictures while removing the winbond chip on top as the dot on the board is not correct and caused this SENBD1 component to go up! And of course i have put original bios chips back on and no picture!!! (Im smart like that i use to sets of chips) i saw the smoke first hand this is the guy plus you can see the pin hole

10 Pins visible on on side only! no markings... Maybe a schematic or something any help would be great

Any help would be great

Thanks in advance!

[SMDFlea]

Re: Dell Precision 3570 - Help With Component Identification!

Maybe a schematic or something any help would be great

Whats the motherboard model number

Beginner's guidelines
https://www.badcaps.net/forum/showthread.php?t=88758
1.1.3 Motherboard model number

[iKonTech]

Re: Dell Precision 3570 - Help With Component Identification!

This not it here i had in a picture the only stuff im seeing

Thanks

[iKonTech]

Re: Dell Precision 3570 - Help With Component Identification!

Ok i did a close up of one other one here and then there is some numbers on the heatsink assembly that may just be for the heatsink assembly...

Not seeing anything else like on most boards i mean this board is only a month or 2 old so not to sure... Where else to look removed all plastic black tapping and looked and looked ill keep at it...

Attached is what else i can find!

Thanks

[iKonTech]

Re: Dell Precision 3570 - Help With Component Identification!

Never Mind i got it straightened out!

Thanks