A1278- 820-2879-B Chime, FAN high speed, white light on, NO video, NO backlit

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lordhex
    Member
    • Oct 2020
    • 6
    • US

    #1

    A1278- 820-2879-B Chime, FAN high speed, white light on, NO video, NO backlit

    A1278 - 820-2879-B Chime, FAN high speed, white light on, NO video, NO backlit

    Hello,

    I have a MBP Mid-2010, that powers on, chimes, fan starts spinning at low speed then turns on high speed. The white light in front next to IR sensor gets bright lit, after chime, dims a little but doesn't turn off completely.

    It does charge, the light on the charger turns orange if the battery needs charging and green when done.

    The screen backlit does not turn on, external monitor does not work either. Does not boot, at all.

    The CAPS lock LED does not turn on/off.

    It had liquid damage 10 years ago, however, was professionally cleaned and been working fine until couple weeks ago. I did take it apart, cleaned the logic board again, but still does not boot.
    I did reset NVRAM/PRAM and SMC.

    Any help would be greatly appreciated. I do have the board view and schematic (attached).
    Attached Files
    Last edited by lordhex; 05-24-2021, 12:48 PM.
    If it doesn't hum, buzz, blink, clink, crank, zapp, meow, burn, spark it means its working as designed.
  • ajbernasko
    Badcaps Veteran
    • Mar 2022
    • 229
    • ghana

    #2
    Re: A1278- 820-2879-B Chime, FAN high speed, white light on, NO video, NO backlit

    it should be a problem with the u1400, check shorts on U9000 pin 4&5, Q9807 pin 5. all does not turn and leaded to the u1400. A rework for the u1400 should work or just need to replace u1400

    Comment

    • lordhex
      Member
      • Oct 2020
      • 6
      • US

      #3
      Re: A1278- 820-2879-B Chime, FAN high speed, white light on, NO video, NO backlit

      Thank you so much for your response. I will take a look again, right now its on a shelf. Few months ago was doing that, and in addition a resistor in the middle of the board was getting hot to touch (I forgot the numbers now) and that's (and other reasons) what probably was causing the fan to speed up to the max. Its interesting that it failed suddenly. One morning it stopped booting.
      If it doesn't hum, buzz, blink, clink, crank, zapp, meow, burn, spark it means its working as designed.

      Comment

      Related Topics

      Collapse

      • Document Archive
        MEDION AKOYA S6219W White 128 Notebook Specification for Upgrade or Repair
        by Document Archive
        This specification for the MEDION AKOYA S6219W White 128 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the S6219W White 128 boardview and S6219W White 128 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
        09-06-2024, 05:35 AM
      • Document Archive
        MEDION AKOYA S6219W White 128 Notebook Specification for Upgrade or Repair
        by Document Archive
        This specification for the MEDION AKOYA S6219W White 128 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the S6219W White 128 boardview and S6219W White 128 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
        09-06-2024, 05:35 AM
      • hazem3636
        A1278 "OTHER High Side Current Sense (IO0R)"
        by hazem3636
        hi there


        this mac 820-3115 , soo slow and not booting i start using ASD please check attached photos






        i satrt with "Power Sensors: High Side"

        i found there is issue @ "OTHER High Side Current Sense (IO0R)"

        PP3V3_S0_HS_OTHER_ISNS = 3.3

        ISNS_HS_OTHER_N = 12.6
        ISNS_HS_OTHER_P = 12.6

        HS_OTHER_IOUT = 0
        so i removed R5419. and still same issue no short to ground at all clean board and i replaced U5410 with same issue no change...
        01-30-2023, 05:13 AM
      • johnbeton
        Macbook A1278 - 820-3115-B no chime, no display
        by johnbeton
        Hello,

        Currently I'm working on a Macbook A1278 with 820-3115-B board.
        This notebook had some liquid damage between U7400 and U4900.

        At first the laptop had no green light, and didn't power on, after cleaning the liquid damage, I replaced R7402 ad R7403 because they where out of spec.

        Now the green light comes on, as soon as the charger is connected the fan start spinning, after 10 seconds it starts spinning harder.

        USB light goes on. But still nog chime or display.

        I checked voltages up untill ALL_SYS_PWRGD, seems...
        12-23-2021, 01:49 PM
      • crewdog
        Hp 15-dy2087nr white lights blinking
        by crewdog
        Board DAOP5HMB8F REV F
        Model OPSH
        No bios battery on board

        Power at cord 19.7, swapped cord 19.7V just to test, tested lid switch good

        Plugged in, battery in, charging port light on solid white, press power button, no fan spin, charging connector
        and power on light both blink white, not in sync, battery voltage 12.2 jumps to 13.0 for a second and then back and repeats.

        Not plugged in, battery in, press power button, no fan spin, power on only blinks white until battery removed, battery 12.7 - 12.1 for a second and then back and repeats....
        10-25-2023, 03:08 PM
      • Loading...
      • No more items.
      Working...