Hi guys, so I was flashing the FloydQ and once booted it asked me to put WiFi password. I did it but then it gave me black screen and the smartphone won't turn on no matter what I do and it was at 100% battery. I tried:
- Recovery combination (Home Button + Vol Up + Power)
- Fastboot combination (Home Button + Vol Down + Power)
- Connect it to the PC with windows
- Conncet it to the PC with Linux
- Tried to see if magically the ADB would find it
- Disconnect battery for hours
- Charging it the whole night (about 6 hours)
The result was always the same, absolutely nothing. I have also an USB Volt Meter and it take 5.10V and 0.23A that I think is reasonable because it has the battery at 100%. What can I do to try to revive it? Any suggestion?
- Recovery combination (Home Button + Vol Up + Power)
- Fastboot combination (Home Button + Vol Down + Power)
- Connect it to the PC with windows
- Conncet it to the PC with Linux
- Tried to see if magically the ADB would find it
- Disconnect battery for hours
- Charging it the whole night (about 6 hours)
The result was always the same, absolutely nothing. I have also an USB Volt Meter and it take 5.10V and 0.23A that I think is reasonable because it has the battery at 100%. What can I do to try to revive it? Any suggestion?
Comment