Acer E5-411

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • maurovalero
    Senior Member
    • Sep 2018
    • 69
    • colombia

    #1

    Acer E5-411

    Dont turn on, have 3,3v in PWRBTN but dont have 3,3 on bios u21, and in coils PL7 y PL4 are shorted to ground, in pl3 5,1v pl2 3,4v, pl6 1,8, i dont have idea how continue the revision, I suspect the fault may be in pu11 or pu7, any sugg
    add bdv and shematic

    https://www.badcaps.net/forum/showthread.php?t=85245
    Last edited by SMDFlea; 06-11-2020, 02:00 AM.
  • ktmmotocross
    Boardkiller
    • Feb 2014
    • 3609
    • slovakia

    #2
    Re: Acer E5-411

    pl7 is GPU core and pl4 PCH . looks like dead PCH section of processor. try to isolate that short with removing that coils

    dead PCH is very common on bga intel processors

    Comment

    • mcplslg123
      Badcaps Legend
      • Jun 2015
      • 7262
      • india

      #3
      Re: Acer E5-411

      Measure resistance on PL7 and PL4 in Ohms mode(Not in diode mode). Low resistance is quite normal on those lines but should not be zero.

      Comment

      Related Topics

      Collapse

      Working...