Working on this laptop that had water spilt on it, and was completely dead,
Replaced pu102 (tps51427a) and removed pq269(SSM3K09FU) VA_off mosfet (awaiting replacement, but removed for now to enable VA)
The laptop now powers up but will not recognize any HDD, or boot from optical drive although they do both spin up, in bios HDD shows as none.
If I boot from usb windows install does not see any drive.
I have 5v at both optical and hdd sata ports, but have never really done any work on sata port so not sure where to look.
this uses the Quanta HK5 DA0HK5MB6F0 MBX-269 motherboard
I have attached schematic for it in case anybody needs it.
Any help would be much appreciated.
Replaced pu102 (tps51427a) and removed pq269(SSM3K09FU) VA_off mosfet (awaiting replacement, but removed for now to enable VA)
The laptop now powers up but will not recognize any HDD, or boot from optical drive although they do both spin up, in bios HDD shows as none.
If I boot from usb windows install does not see any drive.
I have 5v at both optical and hdd sata ports, but have never really done any work on sata port so not sure where to look.
this uses the Quanta HK5 DA0HK5MB6F0 MBX-269 motherboard
I have attached schematic for it in case anybody needs it.
Any help would be much appreciated.
Comment