Hi everyone,
I have an HP ProBook 440 G6 with DAX8JMB16E0 REV. E motherboard that got BIOS bricked after maaany bootloops caused by Window's BCD. I made a dump of the actual BIOS and written a found one.
The PC worked but it was very slooow to show HP logo in first place.
A friend of mine gave me another BIOS for this series and after the flash it powered on (white led on power button) but after few second shutted down and start blinking orange infinitely on the LED near the AC adapter connector on the side.
The laptop doesn't power on anymore, and the blinking led happens even on battery only and immediately after I remove and put the battery back too!
Somewhere says that could be a "insufficient power" error, but it should be only on AC adapter connected, and not even in battery mode.
Any tips, please!?
Thanks!
I have an HP ProBook 440 G6 with DAX8JMB16E0 REV. E motherboard that got BIOS bricked after maaany bootloops caused by Window's BCD. I made a dump of the actual BIOS and written a found one.
The PC worked but it was very slooow to show HP logo in first place.
A friend of mine gave me another BIOS for this series and after the flash it powered on (white led on power button) but after few second shutted down and start blinking orange infinitely on the LED near the AC adapter connector on the side.
The laptop doesn't power on anymore, and the blinking led happens even on battery only and immediately after I remove and put the battery back too!
Somewhere says that could be a "insufficient power" error, but it should be only on AC adapter connected, and not even in battery mode.
Any tips, please!?
Thanks!