Hi.
I have a Lenovo ideapad 100-15 with probably bad dGPU.
I tried to disable it by desoldering inductors going to dGPU.
I desoldered 2 inductors (PL705 and L706) going to +VGA_CORE
And 1 inductor (PL701) going to 1_05VS_LX.
Is there anything else I need to desolder?
If the PL701 is in place, I get fan spin at start, but nothing on the screen, no POST.
If PL701 is desoldered, there is no fan spin, but LCD gets powered on (without backlight), but no POST.
I have attached link to boardview and schematics.
Thank you.
I have a Lenovo ideapad 100-15 with probably bad dGPU.
I tried to disable it by desoldering inductors going to dGPU.
I desoldered 2 inductors (PL705 and L706) going to +VGA_CORE
And 1 inductor (PL701) going to 1_05VS_LX.
Is there anything else I need to desolder?
If the PL701 is in place, I get fan spin at start, but nothing on the screen, no POST.
If PL701 is desoldered, there is no fan spin, but LCD gets powered on (without backlight), but no POST.
I have attached link to boardview and schematics.
Thank you.
Comment