Notebook won’t turn on after screen replacement - Lenovo Legion Silm 5 16IRH8_LOQ 15IRH8 Compal ILG10 LA-M542P Rev 1.0

Collapse
This topic has been answered.
X
X
 
  • Time
  • Show
Clear All
new posts
  • viniciussls
    New Member
    • Dec 2017
    • 3
    • Brazil

    #1

    Notebook won’t turn on after screen replacement - Lenovo Legion Silm 5 16IRH8_LOQ 15IRH8 Compal ILG10 LA-M542P Rev 1.0

    Good morning everyone, this is my first post and I apologize in advance if there are any mistakes in the post.

    I have a Lenovo Legion Slim 5 16IRH8_LOQ with the typical issue of stripes on the screen, but I made the mistake of replacing the screen without physically removing the battery, thinking that just pressing the SW2 button would be enough – it wasn't. The board showed consumption, with LED6301 lit up and PU301 getting very hot. I replaced PU301. Now, the board is not working correctly, but it has no consumption, LED6301 stays on, and I haven't found any other signs of a short on the board. 19V is reaching PU301 correctly, but I only found 4.5V on pin 8.

    I don't have deep knowledge of electronics, I only do small repairs…
    Please, can someone help me?

    Link to boardview - https://www.badcaps.net/forum/troubl...matics-request
    Last edited by SMDFlea; 04-02-2025, 03:51 AM. Reason: Link to boardview
  • Answer selected by viniciussls at 04-17-2025, 01:07 AM.
    viniciussls
    New Member
    • Dec 2017
    • 3
    • Brazil

    Good morning! Thank you very much for your help, but I had to give the client another computer to resolve this case.

    Comment

    • Hublotdz
      New Member
      • Aug 2023
      • 2
      • Algérie

      #2
      Hi, I need your Bios backup if possible I have the same laptop and I have a Bios problem my chip is W25R256JVEN thank you for your help.

      Comment

      • mon2
        Badcaps Legend
        • Dec 2019
        • 13865
        • Canada

        #3
        Share the details of PU301. This is the charger IC? Need the topside markings.

        Bios requests should be made inside the dedicated bios forum. See above.

        Comment

        • viniciussls
          New Member
          • Dec 2017
          • 3
          • Brazil

          #4
          Good morning! Thank you very much for your help, but I had to give the client another computer to resolve this case.

          Comment

          Related Topics

          Collapse

          Working...