MSI CR400 no display

[manuelhai]

Re: MSI CR400 no display

lakas uminit ng cpu

[dre2]

Re: MSI CR400 no display

hi sir ask kolang po kung pwedi gamitin ung capacitor ng cp eto po value 336uf 10v?
wala kc ako mahanap na capacitor
txn

[manuelhai]

Re: MSI CR400 no display

salamat sa thread na to ok na msi ko nag open na kaso problema keyboard ko haha sobrang dikit kasi yun tuloy na deform

[manuelhai]

Re: MSI CR400 no display

wala yatang 330d bro... 330uf dapat.

meron ako for sale 4pcs 330uf 2.5v tantalum caps for 500 pesos only

text me if interested ka 09328732260

Francis

meron sir eh kasi meron ako dito 330 d at may 330 e kaso la positive negative sign d ko ma identify

[fddizon]

Re: MSI CR400 no display

wala yatang 330d bro... 330uf dapat.

meron ako for sale 4pcs 330uf 2.5v tantalum caps for 500 pesos only

text me if interested ka 09328732260

Francis

[manuelhai]

Re: MSI CR400 no display

ano pinagkaiba ng 330d sa 330uf newbie lang ganyan pasensya na..

[manuelhai]

Re: MSI CR400 no display

wala ko alam sa capacitor ehehe pero ok lang ba kahit sobra yung voltage ng ilalagay ko?

[masaru_9]

Re: MSI CR400 no display

oh man.. glad i found this post! now i can try and repair 2 MSI CR400 with the same problem. Thanks!

[chadot]

Re: MSI CR400 no display

put 4 capacitor in nec tokin 220uf

[edvaswitz]

Re: MSI CR400 no display

@fddizon,

rs caps replacement works great. i had a hard time removing the nec tokin ring. after i finished replacing it with 4pcs of 330uf 2.5v and turn it on, it works smoothly.

again, thanks for the tips.

[kenttech16]

Re: MSI CR400 no display

sir kenttech16, can you help me with my msi laptop? it has no display and led sleep lights on as topic in this thread. ill pay you since i dont have any idea where to find those caps.
thanks

But do you know how to fix a laptop or where to put it and how to do it? you can use this thread about nec tokin problem - https://www.badcaps.net/forum/showthread.php?t=8991

*smd caps*
You can find it from an old laptop board or if you know someone who had a defective or junk laptop.

[kenttech16]

Re: MSI CR400 no display

boss ganyan sira ng msi na ginagawa ko ngayon. kahit isa lng ilagay ko na 330d ok na. guide mo nman ako saan ko ilalagay dun. tnx

It will depend with the problem or symptom you have right now.If the unit still boot yet shut off automatically you can add a smd to the vacant pads, try it 1-2 pc od capacitor. I've mentioned it at #31 at this thread it will guide you where to put it exactly.

give me an update what happened then..

[markstein]

Re: MSI CR400 no display

sir kenttech16, can you help me with my msi laptop? it has no display and led sleep lights on as topic in this thread. ill pay you since i dont have any idea where to find those caps.
thanks

[markstein]

Re: MSI CR400 no display

Ken,

your a pro bro. it worked when i put 3 caps with marking NEa JE8 capacitors. too bad that the processor overheats and turn off after a few minutes.(overheat protection) i guess the capacitors value does not fit with the solution.

i am ordering 4 330uf 2.5v tantalum capacitors later. will update you soon.

thanks and regards

sir ffdizon how much will it cost for the repair of my MSI. same goes to your unit sir (no display and LED sleep indicator on) i have no idea where to find those capasitor. pm me sir for your qoutation thank you

[rickybucalan]

Re: MSI CR400 no display

Yeah! it also works for me but it varies among MSI CR or CX with the said problem. Example: If the laptop has a display and then auto-shutoff just before the OS starts it will work by putting additional smd cap to the vacant pads for smd.

boss ganyan sira ng msi na ginagawa ko ngayon. kahit isa lng ilagay ko na 330d ok na. guide mo nman ako saan ko ilalagay dun. tnx

[kenttech16]

Re: MSI CR400 no display

it is a nec token problem: you are going to do is do not remove a nec tokin and then just put only 1pc 330d tantalum capacitor,100 % works for me.try it.

Yeah! it also works for me but it varies among MSI CR or CX with the said problem. Example: If the laptop has a display and then auto-shutoff just before the OS starts it will work by putting additional smd cap to the vacant pads for smd.

[kenttech16]

Re: MSI CR400 no display

thanks kenttech16 for the tip and fddizon for these thread. i have the same model and same problem. I will try it to.

@fddizon
do you have a picture of that fix you did?

@ed, no problem. As long as we could help and share some ideas that's why we are here also.

Goodluck then.

Best effort @fddizon for solving the mystery..

[kenttech16]

Re: MSI CR400 no display

msi laptop problem power but no display i replace 4 tantalum caps to nectokin and i replace the brand new ram and processor but same is no display.. how can i fix it please help.. thank..

vi
Before you do anything with the laptop did you reflow or reheat the nvidia gpu first? or when you replaced smd tantalum then what value was it? it will depend also if what value or kind of tantalum did you used.

pls let us know.

[comptech83]

Re: MSI CR400 no display

Hi,

when powered on, no display, fan spinning, power led is lit, sleep led is lit.
5v 3.3v alw are ok. coils near cpu has .01 and .02 volts.

what does this mean?

it is a nec token problem: you are going to do is do not remove a nec tokin and then just put only 1pc 330d tantalum capacitor,100 % works for me.try it.

[comptech83]

Re: MSI CR400 no display

ken,

i tried putting 4 330uf tantalum capacitors to no avail. still no vcore voltage.

it is a nec token problem: you are going to do is do not remove a nec tokin and then just put only 1pc 330d tantalum capacitor,100 % works for me.try it.